SIGHT WINDOW<br />
Model : SFI-550-14<br />
Brand: DWYER<br />
Service: Compatible gases and liquids<br />
Wetted Materials: Window: glass; Body: plated steel.<br />
Temperature Limit: 200°F (93°C).<br />
Pressure Limit:125 psig (8.6 bar).<br />
Connections:1/4" male NPT.
<div>
<div class="gtx-trans-icon"></div>
</div>

NEW HIGH PRESSURE FLOW DIVIDER<br />
Brand:  Power Hydraulik<br />
4-section high pressure flow divider<br />
max. inlet flow: 160 l / min<br />
max. working pressure continuous: 240 bar<br />
Option "L"= with "with inductive sensor BES 516-300-S135-D-PU05"<br />
including mounting feet<br />
net weight: 20,0 kg / a piece

MINI-SIZE FLOW SWITCHES<br />
Brand: DWYER<br />
Upper Housing Material: Stainless Steel<br />
Lower Housing Material: Stainless Steel<br />
Switch Type: SPDT<br />
Line Connection Size: 1/2" NPT<br />
Tee/Bushing Material: Stainless Steel<br />

MINI OIL METER<br />
Brand: OVAL<br />
Size: 20mm in nominal dia<br />
Flange Rating and Body Materal: ANSI 150RF (FCD450)<br />
Meter Assembly: Direct-reading totalizer<br />
Direct-reading totalizer: L<br />
Remote flow indicator: L/h

TRANSMISOR DE FLUJO<br />
Marca: FCI<br />
Aplicación: Aire<br />
Montaje en tubería horizontal<br />
Dirección del fluido: Izquierda a derecha o Vertical hacia abajo<br />
Carcasa: Aluminio<br />
Rango de temperatura del fluido: -40 a 177°C<br />
Presión de operación máxima: 150psi<br />
Precisión: ±0.75% lectura, ±0.5% full escala<br />
Conexión al proceso: ¾”NPT-M ajustable con férula de teflón<br />
Material de la conexión al proceso: acero inoxidable<br />
Longitud de inserción: 1 a 6” (152,4mm)<br />
Alimentación: 85 a 265 Vac (19.2 a 28.8 VDC)<br />
Display de visualización y configuración.<br />
Comunicación: Foundation Fieldbus H1<br />
Compensación de temperatura extendida y VORTAB (VIP)<br />
Protección: IP67<br />
Aprobación: FM, FMc

TRANSMISOR DE FLUJO<br />
Marca: FCI<br />
Aplicación: Aire<br />
Montaje en tubería horizontal<br />
Dirección del fluido: Izquierda a derecha o Vertical hacia arriba<br />
Carcasa: Aluminio<br />
Rango de temperatura del fluido: -40 a 177°C<br />
Presión de operación máxima: 150psi<br />
Precisión: ±0.75% lectura, ±0.5% full escala<br />
Conexión al proceso: ¾”NPT-M ajustable con férula de teflón<br />
Material de la conexión al proceso: acero inoxidable<br />
Longitud de inserción: 1 a 6” (152,4mm)<br />
Alimentación: 24 Vdc (19.2 a 28.8 VDC)<br />
Comunicación: Foundation Fieldbus H1<br />
Display de visualización y configuración.<br />
Compensación de temperatura extendida y VORTAB (VIP)<br />
Protección: IP67<br />
Aprobación: FM, FMc

MULTI-JET WATER METER WITH PULSED OUTPUT<br />
Brand: DWYER<br />
Size: 1-1/2˝<br />
Coupling size: 1-1/2˝ NPT<br />
Max flow: 100 GMP<br />
Nominal flow range: 5 to 100 <br />
Transitional flow: 1.5<br />
Display max: 99,999,999.9<br />
Pulse rate: 10

MULTI-JET WATER METER WITH PULSED OUTPUT<br />
Brand: DWYER<br />
Size: 1˝<br />
Coupling Size: 1˝ NPT<br />
Max flow: 50<br />
Nominal flow range: 3 to 50<br />
Transitional flow: 0.75<br />
Display max: 99,999,999.9<br />
Pulse Rate: 0.1

MULTI-JET WATER METER WITH PULSED OUTPUT<br />
Brand: DWYER<br />
Size: 3/4<br />
Coupling Size: 3/4˝ NPT.<br />
Max flow: 30 GPM<br />
Nominal flow range: 3 to 30<br />
Transitional flow: 0.25<br />
Display Max: 9,999,999,99<br />
Pulse Rate: 0.1

MIDWEST SIGHT FLOW INDICATORS<br />
Brand: DWYER<br />
Body Style: Single window, bronze body, ABS impeller<br />
Body Size: 1/2 inch connection size<br />
Service: Compatible gases and liquids.<br />
Temperature Limit: 200°F (93°C)<br />
Pressure Limit: 125 psig (8.62 bar)<br />
Mounting Orientation: Horizontal or vertical; 360: Horizontal only.<br />

BI-DIRECTIONAL VARIABLE AREA FLOW METER<br />
Brand: LAKE MONITORS<br />
[B]:Style: Basic online for liquids,<br />
[5]: Port /Line Size Range: 1 1/4 "- 2"<br />
[S]: Material: Stainless Steel<br />
[7]: Range Max Pressure: 6000 PSIG<br />
[W]: Middle fluid: water and 1.0 Specific Gravity<br />
[M]: Thread type: 2 "NPTF<br />
[50]: Flow Range: 20-190 LPM<br />
[BI]: Bi-Directional Flow<br />
Unrestricted Mounting<br />
Allows for horizontal, vertical or inverted installation<br />
and does not require straight plumbing on inlet or<br />
outlet.<br />
[Y]-Incluye adaptador de 2 a 2 ½” NPT.

ULTRASONIC FLOWMETER SETS<br />
NON-INVASIVE PIPE FLOW MEASUREMENT, EASY OPERATION AND <br />
DATA LOGGING OPTION<br />
Brand: DWYER(USA)<br />
Pipe Size Range in (mm): 2 to 79 (50 to 2000)<br />
Power Supply: 86 to 264 VAC<br />
Service: Homogeneous liquids that do not contain more than 3% of air bubbles <br />
Or particulate and capable of ultrasonic wave propagation.<br />
Inputs: TNC cable from sensors.<br />
Range: 0.33 to 33 ft/s (0.1 to 10 m/s).<br />
Display: 240 x 64 pixel graphic display, high contrast black on white with backlight;<br />
Languages: English, French, German, Swedish, Italian, Spanish, Portuguese,<br />
Russian, Norwegian, and Dutch; 5˝ W x 1.3˝ H (5 x 33.02 mm).<br />
Accuracy: ±0.5 to ±2% of flow reading of flow rate > 0.03 ft/s (0.01 m/s) and <br />
Pipe OD > 3.0 in (75 mm); <br />
±3% of flow reading for flow rate > 0.03 ft/s (0.01 m/s) and<br />
pipe OD 0.5 to 3 in (13 to 75 mm)<br />
±6% of flow reading for flow rate < 0.03 ft/s (0.01m/s).<br />
Power Requirements: 86 to 264 VAC (50 to 60 Hz) or 24 VAC/VDC (1 A max).<br />
Power Consumption: 10.5 W.<br />
Temperature Limits: Transducer: -4 to 275°F (-20 to 135°C)<br />
Controller: -4 to 122°F (-20 to 50°C).<br />
Outputs: Analog 1 opto-isolated output: 4 to 20 mA, 0 to 16 mA or 0 to 20 mA<br />
(selectable); Error current: 0 to 26 mA (selectable); Load resistance: 620 Ω max;<br />
Alarm: 2 opto-isolated MOSFET NO relays, 48 V at 500 mA, maximum 200 Hz;<br />
Pulsed: 1 opto-isolated MOSFET relay, 48 V at 500 mA, 1 to 250 pps; Pulse width:<br />
2 to 500 ms (selectable).<br />
Serial Communications: USB (UFC only).<br />
Enclosure Rating: IP65 when using TNC connector; Transducers IP54.<br />
Materials: Plastic ABS and aluminum.<br />
Repeatability: ±0.5 % of measured value or 0.03 ft/s (0.01 m/s).<br />
Electrical Connections: Removable screw-in type terminal block.<br />
Mounting: Wall mounted using 3 type M4 screws.<br />
Turbidity: < 3 % by volume of particulate content.<br />
Permissible Air Content: < 3% by volume.<br />
Response Time: < 500 ms.<br />
Weight: Unit not including accessories: 2.80 lb (1.26 kg); Unit including<br />
accessories: 9.92 lb (4.5 kg).<br />
Agency Approvals: CE.<br />
ADDITIONAL SPECIFICATIONS<br />
Applicable Pipe Material: Carbon steel, SS, copper, UPVC/PVDF, concrete, mild<br />
steel, glass, brass.<br />
Applicable Pipe Lining: Rubber, glass, concrete, epoxy, steel, other*.<br />
Pipe Wall Thickness: 0.04 to 3˝ (1 to 75 mm).<br />
Pipe Lining Thickness: < 1˝ (< 25 mm).<br />
KIT INCLUDES<br />
• Converter<br />
• Set of transducers<br />
• Ruled guide rail<br />
• Steel banding<br />
• Banding clips<br />
• Set of transducer cables<br />
• Set of high temperature interface cables<br />
• Ultrasonic coupling grease

DIRECT READING GLASS FLOWMETERS<br />
Brand: DWYER<br />
Service: Compatible gases or liquids.<br />
Max. Flow Rate: 100 Air SCFH (50 L/min)<br />
Wetting Material: SS<br />
Temperature Limit: 250°F (121°C).<br />
Pressure Limit: 250 psig (17 bar).<br />
Connection: 1/8˝ female NPT.<br />
Repeatability: ±0.25% of scale reading.<br />
Turn-Down Ratio: 10:1.<br />
Mounting: Vertical.

GFM GAS MASS FLOW METER<br />
Brand: Dwyer<br />
Repeatability: ±0.25% of full scale<br />
Response Time: 2 seconds to within ±2% of actual flow<br />
Output: Linear 0-5 VDC and 4-20 mA<br />
Maximum Particulate Size: 5 microns<br />
Temperature Limits:32 to 122°F (0 to 50°C)<br />
Process Connections: 1/4" Compression Fitting<br />
[21] Material: SST<br />
[00] Range N° Range for Specialty Gas Only<br />
[20] Range of Specialty Gas: 20 LPM<br />
[N2] Specialty Gas K Factor and Desired Gas: 1.0000; NITROGEN<br />
[24VDC] Options: 24 VDC

<p>CAUDALIMETRO DIGITAL <br />
Marca: GPI (USA)<br />
Material : ALUMINIO <br />
Conexión : 2 NPT <br />
Presión máxima : 300 PSI <br />
Descripción :  30A 300GPM <br />
USO DE GASOLINA (MEZCLA DE ALCOHOL E15) COMBUSTIBLE DIESEL (MEZCLA DE BIODIESEL B20) KEROSENE</p>

<p></p>

<p></p>

<div>
<div class="gtx-trans-icon"></div>
</div>

<p>CAUDALIMETRO DIGITAL <br />
Marca : GPI (USA) <br />
Rango : 0.3 a 3GPM<br />
Alimentación : 2 BATERIAS AAA<br />
Material : ALUMINIO<br />
Temperatura : -10ºC A +54ºC<br />
Conexión : 1” NPT (HEMBRA)<br />
Presión máxima : 300 PSI<br />
Descripción : USO DE GASOLINA,COMBUSTIBLE DIESEL (MEZCLA DE BIODIESEL B20) KEROSENE<br /><span lang="es" style="font-size:8.5pt;font-family:Verdana, sans-serif;" xml:lang="es"></span></p><p></p>

MEDIDOR DE FLUJO TIPO TURBINA PARA LIQUIDOS<br />
Marca: AW FLOW METERS(USA) <br />
Versión completamente en acero inoxidable para alta duración y trabajo forzado <br />
Aplicación para medir aceites <br />
Rango de trabajo de 0.9 a 9 GPM <br />
Salida de Pulsos(MAG Hall Effect Pickup) <br />
Precisión:0.5% <br />
Conexión 1/2” NPT <br />
Max presión: 285 psi/220C 

FLOW RATE ALARMS<br />
BRAND: AW-LAKE<br />
[M] METER STYLE, Flow Alarm (1 switch)<br />
[5] PORT SIZE RANGE, 1-1/4 - 2”<br />
[A] MATERIAL, Aluminum<br />
[4] MAX. PRESSURE RATING, 600 psig (air & gas, aluminum & brass)<br />
[H] FLUID MEDIA, Oil @ 0.873 specific gravity<br />
[D] PORTING/THREAD TYPE, 1” NPTF, dry seal - 4 only<br />
[10] FLOW RANGES, Liquid(1-10 GPM); Air(10-100 SCFM); Size(3 & 4)<br />

SWITCH DE FLUJO CON INDICACION LOCAL<br />
BRAND: UNIVERSAL FLOW MONITORS,<br />
SETEO:34GPM FLUJO<br />
MAX:60GPM,ESCALA DUAL GPM&LPM TRANSMISSOR 4-20 MA,2"NPT
<div>
<div class="gtx-trans-icon"></div>
</div>

<div>
<div class="gtx-trans-icon"></div>
</div>

SWITCH DE FLUJO CON INDICACION LOCAL<br />
BRAND; UNIVERSAL FLOW MONITORS<br />
SETEO:3GPM, FLUJO<br />
MAX:6GPM,ESCALA DUAL GPM&LPM,TRANSMISSOR 4-20MA,3/4"NPT
<div>
<div class="gtx-trans-icon"></div>
</div>