HANDHELD DIGITAL MANOMETER<br />
Brand: Dwyer<br />
(477B-1)<br />
Service: Air and compatible gases.<br />
Wetted Parts: Consult factory.<br />
Accuracy: ±0.10% FS from 60 to 78°F (15.6 to 25.6°C); ±1% FS from 32 to 60 and<br />
78 to 104°F (0 to 15 .6 and 25.6 to 40°C).<br />
Pressure Hysteresis: ±0.1% FS.<br />
Pressure Limits: See chart.<br />
Temperature Limits: 0 to 140°F (-17.8 to 60°C).<br />
Storage Temperature Limits: -4 to 176°F (-20 to 80°C).<br />
Display: 4-digit LCD (.425 " H x .234 " W digits).<br />
Resolution: See chart.<br />
Power Requirements: 9 volt alkaline battery. Battery included but not connected.<br />
Connections: Two barbed connections for use with 1/8 " (3.18 mm) or 3/16 "<br />
(4.76 mm) I.D. tubing for 477B-1, 477B-2, 477B-3, 477B-4 and 477B-5 only. Two<br />
compression fittings for use with 1/8 " (3.18 mm) I.D. x 1/4 " (6.35 mm) O.D. tubing<br />
for 477B-6 and 477B-7 only.<br />
Weight: 10.2 oz. (289 g).<br />
Agency Approvals: CE.<br />
Range: 0 to 20.00 in w.c.

181030<br />
Acetic Acid Reagent– for 6 months operation includes:<br />
•    (1) x 1 L bottle acetic acid reagent<br />
•    Does not include tubing

211050XPF<br />
Reagent-less Ammonia Consumables Kit– for one year operation, includes:<br />
•    (2) x 1 L empty bottles for use with ammonia reagent (181130)<br />
•    (2) x 4 ft diffusion tubing assemblies with O-rings(150060)<br />
•    Reagent bottle adapter (2110RBA)<br />
•    (1) ammonia standard solution kit (181040)<br />
•    (1) ammonia electrode (100047)<br />
•    (1) reference electrode (210056)<br />
•    (5) x 2 oz bottles reference filling solution(181073)<br />
•    (1) O-ring kit (2110OK)<br />
•    (1) restriction tube assembly (2100RT)<br />
•    (2) x 60 micron inlet filters<br />
•    (1) filter gasket (181127) and<br />
•    (1) set of 100 pipette tips (204846-001)

2110XPCAL<br />
Calibration Kit with Carrying Case<br />
•    0.5 mL pipette (204847-001)<br />
•    Set of 100 pipette tips (204846-001)<br />
•    (1) ammonia standard solution kit (181040)<br />
•    (1) inlet filter<br />
•    Wash bottle and<br />
•    (1) x 4 ft length diffusion tubing (150060)

2110XPEN<br />
Ammonia Analyzer with Protective Enclosure Package includes:<br />
•    Ammonia analyzer with protective enclosure<br />
•    Ammonia electrode<br />
•    Reference electrode<br />
•    ATC probe<br />
•    Ammonia standard solution kit<br />
•    CD user guide<br />
•    More information please see datasheet Attached<br />
•    Brand: Thermo Scientific

Retractable Injection/Sampling Tube Assembly<br />
• Pressure Rating 1500 Psi<br />
• Mounting 1” Full Port Valve<br />
• Temperature Rating 260 C<br />
• Tube and Adaptor Material: 304 SS<br />
• Stuffing Box: 316 SS<br />
• Seal Material: Teflon<br />
• Order Length: 36 Inches<br />
• Safety Clamp INCLUDED

BiTh100Ch,D412(0 a 120ºC)<br />
TERMÓMETROS BIMETALICO PARA APLICACIONES QUÍMICAS<br />
• Marca: AFRISO (Alemania)<br />
• Dial Ø: 100 mm<br />
• Carcasa: acero inoxidable 304 con bisel ,ventana de cristal instrumento<br />
• Conex posterior<br />
• Bulbo: Acero inoxidable 316<br />
• Longitud y diámetro bulbo: 160 mm x 8 mm<br />
• Rango: 0 a 120 ºC<br />
• Grado de protección: IP65<br />
• Conexión macho fijo (G1//2)

006277<br />
Stainless Steel TAG-Etched<br />
Up to 3 Lines of text<br />
COSASCO

<div>SENSOR DE TEMPERATURA TIPO PT-100 CON TRANSMISOR Y THERMOWELL</div>

<div>•<span> </span>Salida de 3 hilos; Clase B</div>

<div>•<span> </span>Completo acero inoxidable.</div>

<div>•<span> </span>Diámetro bulbo 1/4"</div>

<div>•<span> </span>Conexión a proceso 1/2" hilo Npt macho.</div>

<div>•<span> </span>Cabezal de Aluminio Grande tapa roscada IP 67 </div>

<div>•<span> </span>Conector eléctrico 1/2" Npt</div>

<div>•<span> </span>Largo inserción: 1000 mm.</div>

<div>•<span> </span>Marca: Intrial</div>

<div></div>

<div>THERMOWELL </div>

<div>•<span> </span>Material: PTFE</div>

<div>•<span> </span>Diámetro thermowell: 20 mm</div>

<div>•<span> </span>Longitud Themowell: 1000 mm</div>

<div>•<span> </span>Conexión a Instrumento 1/2" NPT.</div>

<div>•<span> </span>Conexión a proceso: 1/2" NPT.</div>

<div></div>

<div>INCLUYE TRANSMISOR DE TEMPERATURA </div>

<div>•<span> </span>Rango: 0-200°C, alojado en cabezal. </div>

<div>•<span> </span>Salida de 4-20mA.</div>

<div>•<span> </span>Marca: Intrial</div>

<div>SENSOR DE TEMPERATURA TIPO PT-100 CON TRANSMISOR</div>

<div>•<span> </span>Salida de 3 hilos; Clase B</div>

<div>•<span> </span>Completo acero inoxidable.</div>

<div>•<span> </span>Diámetro bulbo 1/4"</div>

<div>•<span> </span>Conexión a proceso 1/2" hilo Npt macho.</div>

<div>•<span> </span>Cabezal de Aluminio Grande tapa roscada IP 67 </div>

<div>•<span> </span>Conector eléctrico 1/2" Npt</div>

<div>•<span> </span>Largo inserción: 250 mm.</div>

<div>•<span> </span>Marca: Intrial</div>

<div></div>

<div>INCLUYE TRANSMISOR DE TEMPERATURA </div>

<div>•<span> </span>Rango: 0-200°C, alojado en cabezal. </div>

<div>•<span> </span>Salida de 4-20mA.</div>

MH1222<br />
Wash Head Assembly

RF100 Ch,D402 (0 a 10 Bar)<br />
MANÓMETRO TIPO BOURDON CON GLICERINA<br />
•    Marca: AFRISO (Alemania)<br />
•    Rangos: 0 a 10 bar<br />
•    Diámetro de Carcasa: 4''(100 mm)<br />
•    Precisión: 1.0<br />
•    Temperatura operación medio: Max 150°C<br />
•    Material caja /conexión: Acero inoxidable 304/Acero Inoxidable 316<br />
•    Doble escala Bar/PSI<br /><br />
MD60 (31324W)<br />
SELLO DE DIAFRAGMA MD 30 EN ACERO INOXIDABLE<br />
•    Marca: AFRISO (Alemania)<br />
•    Presión Nominal: PN40<br />
•    Conexión a Proceso: 1½” NPT<br />
•    Conexión a Instrumento: Conexión Soldada<br />
•    Material del diafragma: Acero Inoxidable 316<br /><br />
 

SERIES LTS TILT SWITCH PROBES - Standard (Probe Material Steel)<br />
Brand: DWYER<br />
Service: Powder and bulk.<br />
Temperature Limit: -4 to 104°F (-20 to 40°C).<br />
Switch Type: SPST, normally closed.<br />
Electrical Rating: < 50 mA @ 12 VDC as supplied by Series LTC controller.<br />
Electrical Connection: 3-wire +12 VDC (supplied by controller).<br />
Cable Length: 25´ (7.6 m) unless otherwise specified.<br />
Probe Length: Standard: 9" (23 cm)<br />
Contact Rating: When not used with LTC controller: 60 V max., 0.25 A max.<br />
Actuation Angle: 25° from vertical.<br />
Material: Steel<br />
Switch Surrounding: Epoxy encapsulated.<br />
Mounting Orientation: Vertical.<br />
Weight: Standard: 4.75 lb (2.15 kg)<br />
Agency Approvals: Meets NEMA 4.

TM SERIES WATER METER Brand: GPI Flow Rate / Size: 20 to 200 GPM 2 inches Fitting: NPT female Display / Output: Electronic display

GASMAX EC Gas Monitor, Loop-Powered Gas Monitor for Toxic Applications<br />
- Power Input 10-30VDC at less than 0.75 watts<br />
- Display 64 x 128 pixel LCD with 30-minute trend, bargraph and<br />
- engineering units display.<br />
- Input Accepts microamp-level signals from local or remote<br />
- GDS Corp toxic or oxygen deficiency sensors<br />
- Accuracy +/- 5% of full scale range (typical)<br />
- Standard<br />
- Output<br />
- Standard 2-wire 4-20mA current sink output. Max loop R<br />
- is 600 ohms with nominal 24VDC power supply.<br />
- Temp Electronics -40°C to +60°C. See Echem Sensor Manual<br />
- for additional information<br />
- Housing Aluminum housing with epoxy paint standard; #316<br />
- stainless steel optional<br />
- Dimensions Width 5.4” (137 mm), Height 8” (203 mm), Depth 5”<br />
- (127 mm) Shipping weight 6.5 pounds (3 kg)<br />
- Approvals CSA Certified Div 1 & 2 Groups B, C, D. Suitable for<br />
- explosion-proof installations<br />
- CSA Certified Div 1 & 2 Groups A, B, C, D. Intrinsically<br />
- safe. IMPORTANT: Intrinsically Safe installations<br />
- require IS barrier #10-0263 (MTL 7787P+) or equivalent.<br />
- ATEX Certified EX II 2 G EEx d IIB + H2 T5<br />
- Warranty Two years on electronics and one year on sensors.<br />
//////////CODIGOS PARA ORDENAR///////<br />
- GM-EC: GASMAX EC Gas Monitor, Loop-Powered Gas Monitor for Toxic Applications<br />
- 3: Sensor Head (Local sensor head for reactive gases IS)<br />
- 12: Sensor Type (chlorine)<br />
- 5:  Target Gas Range (0 - 50 ppm)

GMII:         GASMAX II Gas MonitorSingle / Dual Channel Toxic & Combustible Gas Monitor for Hazardous Location Chanel 1<br />
0:    Sensor Head (No sensor head)<br />
00:    Senor Type (No sensor)<br />
0:      Target Gas Range (None)<br />
 Chanel 2<br />
2:    Sensor Head (Local sensor head with splash guard)<br />
50:    Senor Type (SmartIR 0 to 100% LEL Methane)<br />
6:          Target Gas Range (0 - 100% LEL)<br />
 Output<br />
0:    standard 4 -20 ma output (3-wires)<br />
0:    standard temperature range<br />
<br />
GASMAX II Gas Monitor Single / Dual Channel Toxic & Combustible Gas Monitor for Hazardous Locations<br />
Power Input:    10-30VDC at < 4 watts with relay board. Additional power required for Extended Temp & GDS-IR option.<br />
Display:        Backlit 64 x 128 pixel LCD with 30-minute trend, bargraph<br />
Electrochemical Sensor Input:    Channel 1 accepts microamp-level signals from GDS Corp toxic & oxygen deficiency sensors or 4-20mA current source<br />
Bridge Type Sensor Input:        Channel 2 provides adjustable excitation voltage for SmartIR, PID and catalytic bead or 4-20mA current source<br />
Standard Output:            Standard dual 3-wire 4-20mA current source. Max loop R is 750 ohms with nominal 24VDC power supply<br />
Optional Outputs:        Dual 1500CMV isolated 4-20mA current source. Max loop R is 650 ohms with nominal 24VDC; Single or dual MODBUS slave ports; 3x program-mable alarm relays with 5A capability<br />
Temp:        Electronics -40°C to +60°C; See Echem Sensor Manual for sensor limits<br />
Housing :        Aluminum housing with epoxy paint standard; Optional #316 stainless steel housing (specify [SS] in part number)<br />
Dimensions:        Width 5.4” (137 mm), Height 8” (203 mm), Depth 5” (127 mm) Shipping weight 6.5 pounds (3 kg)<br />
Approvals:        CSA Certified for Class I, Div 1, Grps B, C, D. Suitable for XP installations<br />
Warranty:        2 years on electronics and one year on sensors

ACCESS VALVE ASSY, RETRACTABLE SYSTEM<br />
• W/ C.S. SOCKETWELD-O-LET FOR 6" PIPE SIZE.<br />
• X = 1-1/2in DIA FULL PORT BALL VALVE IN C.S.<br />
• X = 1-1/2" PIPE X 1.00" NPT CONCENTRIC REDUCER C.S.<br />
• WITH BLEED VALVE 316 S.S.<br />
• X = SOCKOLET 6" PIPE SIZE IN C.S.<br />
• C= Customized requirement (All thread Nipple welded to both sides of Valve and also to Threadolet as picture show by customer)<br />
Please Refer to “ANEX 01” attached with this Purchase Order

Retractable Strip Coupon,<br />
•Alloy A106GrB,<br />
•Dimensions: 1/16"TH x 1/2"W x 3"LG,<br />
•Grid Blast, Standard Nylon Insulators (250F),<br />
•Preweighed<br />
•Brand: COSASCO

Diaphragm pressure Switch, <br />
Modelo: 0184-45703-1-003<br />
Con Punto de Presion a 0.3 bar F<br />
- Diaphragm pressure switch 0184.<br />
- Rango ajustable 0.3-1.5 bar<br />
- Hilo 1/4" BSPP.<br />
- Para aplicaciones con fluido hidráulico.<br />
- Set at 0.5 bar falling