DIRECTIONAL POPPET VALVE, METRIC
Brand: HYDAC
[01]Type: standard
Manual override: without manual override
[C]Body and ports: cartridge only
[N]Seals: NBR (standard)
[24]Nominal voltage for actuating solenoid: 24 V DC
[DG]Coil connectors (type 40-1836): DIN connector to EN175301-803

AC CENTRIFUGAL FAN
Brand: EBM PAPST
230VAC
BLOWER TYPE: CENTRIFUGAL
SUPPLY VOLTAGE:230V
CURRENT TYPE:AC
FAN FRAME SIZE:252MM
EXTERNAL DEPTH:71MM
FLOW RATE – METRIC
FLOW RATE - IMPERIAL

AGITADOR INDUSTRIAL
Marca: FLUIDMIX
Modelo: VPP3-08-03-B-04/15.6
Motor 2,2 kW – 4 polos – 230/400 V, 60 Hz – IP55 – IE3
Velocidad de giro: 300 rpm
Brida de fijación: ø 250/210 mm, acero al carbono
Longitud de eje: 1500 mm, AISI 316 L
Hélice de perfil axial ø 400 mm, AISI 316 L

INSERT PLATE FOR SAE CHECK VALVE
Brand: BUCHER HYDRAULICS
Nominal size: 1 1/4“

CHECK VALVE
Brand: BUCHER HYDRAULICS
for SAE flange port
With dual-purpose body 3000 psi / 6000 psi
O-rings on both faces
Nominal size: 1 1/4“
Opening pressure: 2 bar
Metering orifice: Without orifice
O-rings: Nitrile (standard)

CHECK VALVE
Brand: BUCHER HYDRAULICS
for SAE flange port
With dual-purpose body 3000 psi / 6000 psi
O-rings on both faces
Nominal size: 1 1/4“
Opening pressure: 4 bar
Metering orifice: Without orifice
O-rings: Nitrile (standard)

MAGNETOSTRICTIVE SENSORS
Brand: BALLUFF
Connection Connector, M16x0.75, 8-pin
Connection version axial
Polarity reversal protected Ub up to 36 V
Short-circuit protection to GND and to 36 V DC
Current consumption max. at 24 V DC 150 mA
Error signal Ia falling 20.4 mA
Galvanic isolation no
Operating voltage Ub 20…28 VDC
Overvoltage protection Ub up to 36 V
Switch-on delay max. 600 ms
Voltage-proof up to (GND to housing) 500 V AC
Protection degree IP67 with connector
Relative humidity ≤ 90 %, non-condensing
Storage temperature -40…100 °C
Temperature coefficient typ. ≤ 30 ppm/K at 50% of nominal stroke 500mm
Ambient temperature -40…85 °C
EN 55016-2-3, Radiation For industrial and residential use
EN 60068-2-27, Continuous shock 150 g, 2 ms
EN 60068-2-27, Shock 150 g, 6 ms
EN 60068-2-6, Vibration 20 g, 10…2000 Hz

VÁLVULA SOLENOIDE DE 2 VÍAS
Marca: ODE
N.C. de Ø 1" NPT, Kv=120 l/min. DN 25 mm.
Presión de trabajo con bobina de 8W y 220VAC: 0 a 8 bar
Temp. de trabajo: -10 a 90 ºC

​VÁLVULA SOLENOIDE DE 2 VÍAS
Marca: ODE
N.C. de Ø 1 1/2" BSP con sellos de Viton
Kv= 280 l/min., DN 40 mm.
Presión de trabajo con bobina de 220 V AC - 12W: 0 a 16 bar
Temp. de trabajo: -10 a 140 °C

INDUCTIVE DUAL SENSOR
Brand: TURCK ELEKTRONIK
Rated switching distance Sn 4 mm
Mounting conditions non-flush
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4
Repeatability ð 2 % of full scale
Temperature drift ð ± 10 %
Hysteresis 3…15 %
Ambient temperature -25…+70 °C
Operating voltage 18…33VDC
No-load current I0 ð 35 mA
Rated insulation voltage ð 0.5 kV
Output function 2-wire, 2x NO, AS-i
I/O configuration (HEX) / ID code (HEX) S-7/ F

AGITADOR INDUSTRIAL
Marca: FLUIDMIX
Motor 2,2 kW – 4 polos – 380 V – 60 Hz – IP55 – IE3
Velocidad de giro: 233 rpm
Brida de fijación: ø 250/210 mm, acero al carbono
Longitud de eje: 800 mm, AISI 316 L
Turbina de 4 palas plegables ø 400 mm, AISI 316 L
Soporte para depósito IBC en acero inoxidable AISI 304

HYDRAULIC ACCUMULATOR
Brand: INTEGRAL ACUMULATOR
Volume: 1.0 dm3(1 Litro)
Max allowable working pressure: 210 bar
Teste pressure: 315 bar
Max. Allowable working pressure range: 170 bar
Max. Allowable working temperatura: -20 bis +80°C
Working fluid: according to fluid group II for diaphragm material NBR
Surface protection: black coated
Precharge pressure: at

DIRECTIONAL VALVE
Brand: YUKEN
Max. Pres: 34 MPa
Max. Tank Pres.: 21 MPa
Max. Fluid Temp.: 70 °C
Voltage: AC240 V
Frequency: 60 Hz

BRAZED PLATE HEAT EXCHANGERS
Brand: HYDAC
Plate material Stainless steel 1.4401 (AISI 316)
Braze material Copper (standard), nickel
Temperature range up to +200 °C
Pressures Copper braze: max. 30 bar (test pressure 45 bar)
Nickel braze: max. 10 bar
Number of plates: 50
Connections: 4 x G1" female thread

SINGLE CANISTER FILTER HOUSING
Brand: CIM-TEK
IN/OUT: 1” NPT
Dims: 5 5/16" DIA. X 14 5/8" LEN.
Carton Qty: 1 Each
Carton Weight: 6.9#
Carton Size: 5 1/2” X 5 1/2” X 14 1/2”
Maximum Working Pressure: Up to 50 psi / 3.4 bar
Flow Range: Up to 30 GPM per Assembly
Maximum Diff. Pressure: 25 psid / 1.7 bar
Includes 30 micron solids separator element

FILTER ELEMENT
Brand: HYDAC
Size: 330
Micron Rating: 10
Filter Collapse Rating: 290 psid
Filter Media: Optimicron
Element Type: Pressure Line
Seals: Viton (FKM)
Nominal Flow Rating: 87 gpm

SOLENOID SHUTOFF VALVE
Brand: JEFFERSON SOLENOID
Body Material: Brass
Seat Material: Buna N
Port Size: 1/8 in
Valve Type: Normally Closed
Operating Pressure: 0 to 60 psig / 0 to 4 bar
Max. Temperature: 176 ºF  / 80 ºC
Flow Coefficient (Cv): 0.30
Orifice Size: 0.118 in / 3 mm
Voltage : 220 VAC
Coil Type: GF06C
Coil VA Inrush Amperage: 12.9

AISLADOR
MARCA: MERSEN
CAPACIDAD DE AISLAMIENTO:100 AMP 
TIPO DE MONTAJE: RIEL DIN MATERIAL: PLASTICO NH 
CARACTERISTICAS ADICIONALES: PARA PORTAFUSIBLE SIZE 00
PACK 2

FILTRO DE COMBUSTIBLE
Marca: CIM-TEK
1 1/2" NPTF
Flujo máximo 60 GPM
Elementos separadores de sólidos y agua de 10 micrones  

VÁLVULA PINCH
Marca: FLOWROX(Finlandia)
Modelo: PV100A10-603L,SBRT(Cuerpo Abierto)
- Diámetro: 4"( 100 mm )
- Accionamiento: Actuador Neumático de doble efecto, presión de alimentación mínima de 6 Bar.
- Incluye: Cilindro FESTO DSBG -200-100-PPVA-N3
- Máxima Presión de Operación: 10 Bar.
- Cuerpo: Fierro Fundido con recubrimiento de pintura epóxica.
- Manga: SBRT, Presión nominal 16 Bar.
- Conexión: Bridada ANSI 150.