DIRECTIONAL POPPET VALVE, METRIC<br />
Brand: HYDAC<br />
[01]Type: standard<br />
Manual override: without manual override<br />
[C]Body and ports: cartridge only<br />
[N]Seals: NBR (standard)<br />
[24]Nominal voltage for actuating solenoid: 24 V DC<br />
[DG]Coil connectors (type 40-1836): DIN connector to EN175301-803

AC CENTRIFUGAL FAN<br />
Brand: EBM PAPST<br />
230VAC<br />
BLOWER TYPE: CENTRIFUGAL<br />
SUPPLY VOLTAGE:230V<br />
CURRENT TYPE:AC<br />
FAN FRAME SIZE:252MM<br />
EXTERNAL DEPTH:71MM<br />
FLOW RATE – METRIC<br />
FLOW RATE - IMPERIAL

AGITADOR INDUSTRIAL<br />
Marca: FLUIDMIX<br />
Modelo: VPP3-08-03-B-04/15.6<br />
Motor 2,2 kW – 4 polos – 230/400 V, 60 Hz – IP55 – IE3<br />
Velocidad de giro: 300 rpm<br />
Brida de fijación: ø 250/210 mm, acero al carbono<br />
Longitud de eje: 1500 mm, AISI 316 L<br />
Hélice de perfil axial ø 400 mm, AISI 316 L

INSERT PLATE FOR SAE CHECK VALVE<br />
Brand: BUCHER HYDRAULICS<br />
Nominal size: 1 1/4“

CHECK VALVE<br />
Brand: BUCHER HYDRAULICS<br />
for SAE flange port<br />
With dual-purpose body 3000 psi / 6000 psi<br />
O-rings on both faces<br />
Nominal size: 1 1/4“<br />
Opening pressure: 2 bar<br />
Metering orifice: Without orifice<br />
O-rings: Nitrile (standard)

CHECK VALVE<br />
Brand: BUCHER HYDRAULICS<br />
for SAE flange port<br />
With dual-purpose body 3000 psi / 6000 psi<br />
O-rings on both faces<br />
Nominal size: 1 1/4“<br />
Opening pressure: 4 bar<br />
Metering orifice: Without orifice<br />
O-rings: Nitrile (standard)

MAGNETOSTRICTIVE SENSORS<br />
Brand: BALLUFF<br />
Connection Connector, M16x0.75, 8-pin<br />
Connection version axial<br />
Polarity reversal protected Ub up to 36 V<br />
Short-circuit protection to GND and to 36 V DC<br />
Current consumption max. at 24 V DC 150 mA<br />
Error signal Ia falling 20.4 mA<br />
Galvanic isolation no<br />
Operating voltage Ub 20…28 VDC<br />
Overvoltage protection Ub up to 36 V<br />
Switch-on delay max. 600 ms<br />
Voltage-proof up to (GND to housing) 500 V AC<br />
Protection degree IP67 with connector<br />
Relative humidity ≤ 90 %, non-condensing<br />
Storage temperature -40…100 °C<br />
Temperature coefficient typ. ≤ 30 ppm/K at 50% of nominal stroke 500mm<br />
Ambient temperature -40…85 °C<br />
EN 55016-2-3, Radiation For industrial and residential use<br />
EN 60068-2-27, Continuous shock 150 g, 2 ms<br />
EN 60068-2-27, Shock 150 g, 6 ms<br />
EN 60068-2-6, Vibration 20 g, 10…2000 Hz

VÁLVULA SOLENOIDE DE 2 VÍAS<br />
Marca: ODE<br />
N.C. de Ø 1" NPT, Kv=120 l/min. DN 25 mm.<br />
Presión de trabajo con bobina de 8W y 220VAC: 0 a 8 bar<br />
Temp. de trabajo: -10 a 90 ºC

​VÁLVULA SOLENOIDE DE 2 VÍAS<br />
Marca: ODE<br />
N.C. de Ø 1 1/2" BSP con sellos de Viton<br />
Kv= 280 l/min., DN 40 mm.<br />
Presión de trabajo con bobina de 220 V AC - 12W: 0 a 16 bar<br />
Temp. de trabajo: -10 a 140 °C

INDUCTIVE DUAL SENSOR<br />
Brand: TURCK ELEKTRONIK<br />
Rated switching distance Sn 4 mm<br />
Mounting conditions non-flush<br />
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4<br />
Repeatability ð 2 % of full scale<br />
Temperature drift ð ± 10 %<br />
Hysteresis 3…15 %<br />
Ambient temperature -25…+70 °C<br />
Operating voltage 18…33VDC<br />
No-load current I0 ð 35 mA<br />
Rated insulation voltage ð 0.5 kV<br />
Output function 2-wire, 2x NO, AS-i<br />
I/O configuration (HEX) / ID code (HEX) S-7/ F

AGITADOR INDUSTRIAL<br />
Marca: FLUIDMIX<br />
Motor 2,2 kW – 4 polos – 380 V – 60 Hz – IP55 – IE3<br />
Velocidad de giro: 233 rpm<br />
Brida de fijación: ø 250/210 mm, acero al carbono<br />
Longitud de eje: 800 mm, AISI 316 L<br />
Turbina de 4 palas plegables ø 400 mm, AISI 316 L<br />
Soporte para depósito IBC en acero inoxidable AISI 304<br />

HYDRAULIC ACCUMULATOR<br />
Brand: INTEGRAL ACUMULATOR<br />
Volume: 1.0 dm3(1 Litro)<br />
Max allowable working pressure: 210 bar<br />
Teste pressure: 315 bar<br />
Max. Allowable working pressure range: 170 bar<br />
Max. Allowable working temperatura: -20 bis +80°C<br />
Working fluid: according to fluid group II for diaphragm material NBR<br />
Surface protection: black coated<br />
Precharge pressure: at

DIRECTIONAL VALVE<br />
Brand: YUKEN<br />
Max. Pres: 34 MPa<br />
Max. Tank Pres.: 21 MPa<br />
Max. Fluid Temp.: 70 °C<br />
Voltage: AC240 V<br />
Frequency: 60 Hz

BRAZED PLATE HEAT EXCHANGERS<br />
Brand: HYDAC<br />
Plate material Stainless steel 1.4401 (AISI 316)<br />
Braze material Copper (standard), nickel<br />
Temperature range up to +200 °C<br />
Pressures Copper braze: max. 30 bar (test pressure 45 bar)<br />
Nickel braze: max. 10 bar<br />
Number of plates: 50<br />
Connections: 4 x G1" female thread

SINGLE CANISTER FILTER HOUSING<br />
Brand: CIM-TEK<br />
IN/OUT: 1” NPT<br />
Dims: 5 5/16" DIA. X 14 5/8" LEN.<br />
Carton Qty: 1 Each<br />
Carton Weight: 6.9#<br />
Carton Size: 5 1/2” X 5 1/2” X 14 1/2”<br />
Maximum Working Pressure: Up to 50 psi / 3.4 bar<br />
Flow Range: Up to 30 GPM per Assembly<br />
Maximum Diff. Pressure: 25 psid / 1.7 bar<br />
Includes 30 micron solids separator element

FILTER ELEMENT<br />
Brand: HYDAC<br />
Size: 330<br />
Micron Rating: 10<br />
Filter Collapse Rating: 290 psid<br />
Filter Media: Optimicron<br />
Element Type: Pressure Line<br />
Seals: Viton (FKM)<br />
Nominal Flow Rating: 87 gpm<br />

SOLENOID SHUTOFF VALVE<br />
Brand: JEFFERSON SOLENOID<br />
Body Material: Brass<br />
Seat Material: Buna N<br />
Port Size: 1/8 in<br />
Valve Type: Normally Closed<br />
Operating Pressure: 0 to 60 psig / 0 to 4 bar<br />
Max. Temperature: 176 ºF  / 80 ºC<br />
Flow Coefficient (Cv): 0.30<br />
Orifice Size: 0.118 in / 3 mm<br />
Voltage : 220 VAC<br />
Coil Type: GF06C<br />
Coil VA Inrush Amperage: 12.9

AISLADOR<br />
MARCA: MERSEN<br />
CAPACIDAD DE AISLAMIENTO:100 AMP <br />
TIPO DE MONTAJE: RIEL DIN MATERIAL: PLASTICO NH <br />
CARACTERISTICAS ADICIONALES: PARA PORTAFUSIBLE SIZE 00<br />
PACK 2

FILTRO DE COMBUSTIBLE<br />
Marca: CIM-TEK<br />
1 1/2" NPTF<br />
Flujo máximo 60 GPM<br />
Elementos separadores de sólidos y agua de 10 micrones  

VÁLVULA PINCH<br />
Marca: FLOWROX(Finlandia)<br />
Modelo: PV100A10-603L,SBRT(Cuerpo Abierto)<br />
- Diámetro: 4"( 100 mm )<br />
- Accionamiento: Actuador Neumático de doble efecto, presión de alimentación mínima de 6 Bar.<br />
- Incluye: Cilindro FESTO DSBG -200-100-PPVA-N3<br />
- Máxima Presión de Operación: 10 Bar.<br />
- Cuerpo: Fierro Fundido con recubrimiento de pintura epóxica.<br />
- Manga: SBRT, Presión nominal 16 Bar.<br />
- Conexión: Bridada ANSI 150.