CURRENT TO PRESSURE TRANSDUCER
Brand: DWYER
4-20 mA input
6-30 psi (40-200 kPa) output
Service: Oil free, clean dry air filtered to 40 microns.
Input Signal: 4 to 20 mA.
Input Impedance: IP-42: 180 ohms; IP-43 and IP-44: 220 Ω.
Air Pressure: Min: 3 psig (21 kPa) above max output; Maximum: 100 psig (700 kPa).
Linearity: < ±0.75% of span.
Hysteresis: < 1% of span.
Repeatability: < 0.5% of span.
Supply Pressure Sensitivity: < ±0.1% of span per psig (< ±0.15% of span per 10 kPa).
Power Requirements: Loop-powered.
Temperature Limits: -20 to 140°F (-30 to 60°C)
Pressure Connections: 1/4" female NPT.
Electrical Connection: 1/2" female NPT.
Air Consumption: 0.03 SCFM (0.5 m3/h) typical.
Output Capacity: 4.5 SCFM (7.6 m3/h ANR) at 25 psig (175 kPa) supply; 12 SCFM (20 m3/h) at 100 psig (700 kPa) supply.
Relief Capacity: 2 SCFM (3.4 m3/h) at 5 psig (35 kPa) above 20 psig (140 kPa) setpoint.
Weight: 2.1 lb (0.94 kg).
Agency Approvals: CE, FM.

Chemical Injection Atomizers
STV-LP2-GAS8
STV-LP2, Graphoil Seal (App. Below 1000°F), 316L SS Process Wetted Materials, 0.5in.O.D. Shaft, 1/2 in. Process MNPT
Connection, Patented Locking Device
8S-A1MR48H
Atomizer Shaft, 1/16 in. MNPT Atomizer Connection, 0.5in. Dia. Shaft , Reduced Tip, 316 Stn, Overall Length = 48in,
Insertion Length = 36in
SNR
Spring Loaded Nozzle, 525 psi Cracking Pressure, reduced Diameter, 1/16 in. Female NPT connection
HC6
Handle Insertion Assembly, 12 in. Long Safety Chain, 3/8 in. Diam. Thread Insert

• Screw-in resistance thermometer
• 1 x Pt 100 Ohm DIN EN 60751, class B,
• protective tube ø 9 mm, built-in lenght 150
• mm, thread G1/2", material 1.4571, with
• 25.000 mm connection wire PFA/shield/PFA
• (cable no. 13A), 4 x 0,22 mm², 1 wire cutted,
• white, 3-wire, with 30 mm free ends,
• temperature range: -50°C to +260°C

* PERFORMANCE DEL EQUIPO :
==========================
- Rango de medición : 0 a 14 PH (0 a 12 sin el error del ion sodio)
- Respuesta : 95% en menos de 5 segundos
- Presión de operación : Hasta 100PSI
- Temperatura de operación : 0 a 70ºC (Vida del electrodo se reduce
drásticamente a temperaturas encima 50º C)
* MATERIALES :
=============
- Cuerpo de Electrodo : CPVC
- Electrodo de referencia : HDPE
- O-RING : FKM (Vitón)
- Electrodo : Vidrio
- Punto de referencia diferencial : TITANIO
* CONEXIONES DE MONTAJE :
=========================
- Tipo coaxial
- Montaje de inmersión
- 03 metros de cable para conexionado.
- Material de Cubierta : CPVC
- Conexíon de montaje externo : 1" Rosca externa NPT

PLASTIC END CAP
For “MERIDIAN UNIVERSAL GAS DETECTOR”

MODEL: V6EPB-B-D-4-B-CV-GL
FLOTECT® MINI-SIZE FLOW SWITCHES, 1-1/4” NPT, Brass, -4 to 220°F 
Brand: DWYER
Upper Housing Material: Brass
Lower Housing Material: Brass
Switch Type: DPDT
Line connection Size: 1-1/4” NPT
Tee/Bushing Material: Brass
Option:
Custom Vane
Ground lead
Service: Gases or liquids compatible with wetted materials.
Wetted Materials: Brass
Magnet: Ceramic; O-ring: Buna-N standard, Fluoroelastomer
Temperature Limits: -4 to 220°F (-20 to 105°C)
Ambient Temperature -4 to 167°F (-20 to75°C) Process Temperature: -4 to
220°F (-20 to 105°C).
Pressure Limit: Brass tee models 250 psi (17.2 bar), iron tee models 1000
psi (69 bar),
ATEX 0344 II 2 G Ex d IIC T6 Gb Process Temp ≤ 75°C Alternate
Temperature Class T5 Process Temp ≤ 90°C, 115°C (T4) Process Temp
≤ 105°C
consult factory. EC-type Certificate No.: KEMA 04ATEX2128.
ATEX Standards: EN 60079-0: 2009; EN 60079-1: 2007.IECEx
Certified: For Ex d IIC T6 Gb Process Temp ≤ 75°C Alternate Temperature
Class T5 Process Temp ≤ 90°C, 115°C (T4) Process Temp ≤ 105°C consult
factory.
IECEx Certificate of Conformity: IECEx DEK 11.0039;
IECEx Standards: IEC 60079-0: 2007; IEC 60079-1: 2007;
Korean Certified (KC) for: Ex d IIC T6 Gb Process Temp ≤ 75°C;
KTL Certificate Number: 2012-2454-75.
Switch Type: DPDT snap switch optional.
Electrical Rating: UL models: 5 A @125/250 VAC. CSA, ATEX and IECEx
models:
5 A @ 125/250 VAC (V~); 5 A res., 3 A ind. @ 30 VDC (V ). MV option: .1 A
@
125 VAC (V~). MT option: 5 A @125/250 VAC (V~). [MT option not UL,
CSA, ATEX
or IECEx].
Electrical Connections: UL models: 18 AWG, 18" (457.20 mm) long.
ATEX/CSA /IECEx models: terminal block.
Upper Body: Brass
Conduit Connections: 3/4" (19.05 mm) male NPT standard, 3/4" (19.05
mm)
female NPT or M25 with BSPT option on junction box models.
Mounting Orientation: Switch can be installed in any position but the
actuation/
deactuation flow rates in the charts are based on horizontal pipe runs and
are nominal values.
Set Point Adjustment: Standard V6 models none. Without tee models vane
is
trimmable. Low flow models are field adjustable in the range shown. See
set point
chartsu.
Weight: 2 to 6 lb (.9 to 2.7 kg) depending on construction.
Agency Approvals: ATEX, CE, CSA, IECEx, KTL, UL.

Variable Area Flowmeter/-switch Glass Cone with Thread Connection
Brand: Kobold (Alemania)
Model: URM-33-24H-I4-0
[URM-33]:
Mounting position: Vertical, flow direction from bottom
Accuracy: Class 4
Max. Temperature: 65 °C
Max. Pressure: 6 bar...16 bar depend see data sheet
Material: Connection, float / seal/ ring 1.4301 / NBR / PVC
[24H]: Range Full Scale: water: 100 L/h, range factor 1:10
[I4]: Connection: G 1/2, female
[0]: Contacts: w/o

FLOWMETER VARIABLE AREA

MODEL: URM-33-45L-I6-0

BRAND: KOBOLD



URM-33:

Mounting position, vertical, flow direction from bottom

Accuracy, Class 4

Max. Temperature, 65°C

Max. Pressure, 16 bar

Material: connection, float / seal/ ring, 1.4301 / NBR / PVC

22L: Range Full Scale*, 0.2 - 2 Nm³/h. 

I4: Connection, G1/2" female

0: Without (W/O)

Flow Counter and Batch controller 
MODEL: ZOD-Z3-KM-1-F3-E-0
BRAND: KOBOLD
ZOD-Z3:
Housing (mm), Ø122 / 96 x 96
LCD Digital display, 8 digit
Function, Flow + Counter
Counter function, Partial/total value
Switch output, NPN/PNP
Pulse output, NPN/PNP
Analogue output, 4-20 mA
Ambient temperature, -20…+80 °C
Protection, IP 66/67 (NEMA 4X)
KM: Housing version, Universal housing attached
1: Electrical connection/Cable gland, 3 x cable entry M20
F3: Supply voltage, 8…24 VDC, Battery
E: Options, ATEX approval
0: Mechanical protection, w/o
Datasheet:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/z2gb_zod.pdf

Oval Gear Flow Meter/Counte
MODEL: DOM-S-35H-R9-3-H0-0
BRAND: KOBOLD
[DOM-S] Oval Gear Flow Meter/Counter
[35H] Measuring range: 30-450 L/min
[R9] Mech. connection, G 2 for meas. range 35H and 40H
[3] Seal, PTFE encaps. FPM for meas. range 35H and 40H
[H0] Electronic: Pulse output, NPN and reed switch
[0] Accessory, Special gear wheels for viscosity > 1000 cP for range 35H
Operating principle: Gear Wheel
Mounting position:horizontal / vertical
Flow direction: in direction of the arrow
max. temperature:120 °C
max. pressure: 12...68 bar
Accuracy: ±0,5 % ...1 % of reading
Housing material:st. st. 1.4401
Rotor material: st. st. 1.4401
Datasheet:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/s4gb_dom.pdf

Oval Gear Flow Meter/Counter
Model: DOM-A-35H-R9-3-H0-0
Brand: Kobold
[DOM-A] Oval Gear Flow Meter/Counter
[35H] Measuring range: 30-450 L/min
[R9] Mech. Connection: G 2 for meas. range 35H and 40H
[3] Seal: PTFE encaps. FPM for meas. range 35H and 40H
[H0] Electronic: Pulse output, NPN and reed switch
[0] Accessory: Without
Operating principle: Gear Wheel
Mounting position:horizontal / vertical
Flow direction: in direction of the arrow
max. temperature:120 °C
max. pressure: 12...68 bar
Accuracy: ±0,5 % ...1 % of reading
Housing material:st. st. 1.4401
Rotor material: st. st. 1.4401
Datasheet:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/s4gb_dom.pdf

Oval Gear Flow Meter/Counte
MODEL: DOM-S-35H-R9-3-R0-0
BRAND: KOBOLD
[DOM-S] Oval Gear Flow Meter/Counter
[35H] Measuring range: 30-450 L/min
[R9] Mech. connection, G 2 for meas. range 35H and 40H
[3] Seal, PTFE encaps. FPM for meas. range 35H and 40H
[R0] Electronic: Pulse output, reed switch
[0] Accessory, Special gear wheels for viscosity > 1000 cP for range 35H
Operating principle: Gear Wheel 
Mounting position:horizontal / vertical
Flow direction: in direction of the arrow
max. temperature:120 °C
max. pressure: 12...68 bar 
Accuracy: ±0,5 % ...1 % of reading
Housing material:st. st. 1.4401
Rotor material: st. st. 1.4401 
Datasheet:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/s4gb_dom.pdf

Oval Gear Flow Meter/Counter
Model: DOM-A-35H-R9-3-R0-0
Brand: Kobold
[DOM-A] Oval Gear Flow Meter/Counter
[35H] Measuring range: 30-450 L/min
[R9] Mech. Connection: G 2 for meas. range 35H and 40H
[3] Seal: PTFE encaps. FPM for meas. range 35H and 40H
[R0] Electronic: Pulse output, reed switch
[0] Accessory: Without
Operating principle: Gear Wheel 
Mounting position:horizontal / vertical
Flow direction: in direction of the arrow
max. temperature:120 °C
max. pressure: 12...68 bar 
Accuracy: ±0,5 % ...1 % of reading
Housing material:st. st. 1.4401
Rotor material: st. st. 1.4401 

Oval Gear Flow Meter/Counter
Model: DOM-A-35H-R9-3-Z3-0
Brand: Kobold
[DOM-A] Oval Gear Flow Meter/Counter
[35H] Measuring range: 30-450 L/min
[R9] Mech. Connection: G 2 for meas. range 35H and 40H
[3] Seal: PTFE encaps. FPM for meas. range 35H and 40H
[Z3] Electronic: Z3 electronic LCD totaliser, rate, outputs: 4-20 mA, alarm, pulse (ZOD-Z3)
[0] Accessory: Without
Operating principle: Gear Wheel
Mounting position:horizontal / vertical
Flow direction: in direction of the arrow
max. temperature:120 °C
max. pressure: 12...68 bar
Accuracy: ±0,5 % ...1 % of reading
Housing material:st. st. 1.4401
Rotor material: st. st. 1.4401

Oval Gear Flow Meter/Counte
MODEL: DOM-S-35H-R9-3-Z3-0
BRAND: KOBOLD
[DOM-S] Oval Gear Flow Meter/Counter
[35H] Measuring range: 30-450 L/min
[R9] Mech. connection, G 2 for meas. range 35H and 40H
[3] Seal, PTFE encaps. FPM for meas. range 35H and 40H
[Z3] Electronic: LCD totaliser with rate
[0] Accessory, Special gear wheels for viscosity > 1000 cP for range 35H
Operating principle: Gear Wheel
Mounting position:horizontal / vertical
Flow direction: in direction of the arrow
max. temperature:120 °C
max. pressure: 12...68 bar
Accuracy: ±0,5 % ...1 % of reading
Housing material:st. st. 1.4401
Rotor material: st. st. 1.4401
Datasheet:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/s4gb_dom.pdf

FLOW SWITCH WITH PADDLE AND BELLOWS
MODEL: DWN-15-R25-0-R-T-0
BRAND: KOBOLD
DWN-1:    
    Operating principle, paddle-bellow
    Indication, w/o
    Flow direction, in direction of the arrow
    Output, 1 microswitch/SPDT, adjustable
    Max. Temperature, 100 °C
    Connection, male thread
5:    Material combination, brass
R25:    Connection, G 1 male
0:    Signal lamp, 230 VAC
R:    Flow direction, from right to left
T:    Mounting pos. of indicat., above pipe
0:    Options, w/o option
Datasheet:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/s3gb_dwn.pdf

Pressure sensor with ceramik sensor element 
MODEL: SEN-87-3-0-B025-N
BRAND: KOBOLD
[SEN-87] Pressure sensor with ceramik sensor element
[3] Electr. Connection:  plug M12x1
[0] Accuracy: 0,5 % of FS
[W/O] Output:  4-20 mA, 2-wire
[B025] Measuring range: 0...1 bar
[N] Option: NPT thread
Version:  with internal sensor
Pressure type:  relative pressure
Accuracy: 0,5 % of FS
measuring principle:  thick film
Medium temperature:  -40..+85 °C
Pressure conn. : st. Steel 1.4301
Thread: NPT 1/4 male 
Power supply: 15-32 VDC
Electr. Connection: DIN plug form A
Protection: IP 65
Ficha Técnica:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/p2gb_sen-86-87.pdf

Pressure sensor with ceramik sensor element 
MODEL: SEN-86-3-0-B025-N
BRAND: KOBOLD
[SEN-86] Pressure sensor with ceramik sensor element
[3] Electr. Connection:  plug M12x1
[0] Accuracy: 0,5 % of FS
[W/O] Output:  4-20 mA, 2-wire
[B025] Measuring range: 0...1 bar
[N] Option: NPT thread
Version:  with internal sensor
Pressure type:  relative pressure
Accuracy: 0,5 % of FS
measuring principle:  thick film
Medium temperature:  -40..+85 °C
Pressure conn. : st. Steel 1.4301
Thread: NPT 1/2 male 
Power supply: 15-32 VDC
Electr. Connection: DIN plug form A
Protection: IP 65

Viscosity Compensated Flowmeter/-switch
Brand: KOBOLD
Model: VKG-22-10-U0-N25
[VKG-22]:
Operating principle, variable area
Mounting position, all directions
Flow direction, in direction of the arrow
Body material, St.St.
Seal, FPM
Sight glass, Duran
Side mounted dial, w/o
Switch point, adjustable
Accuracy, ±4 % FS (at 105 mm²/s)
Max. temperature, 100 °C
Max. pressure, 12 bar
Viscosity range, 1...540 mm²/s
[10]: Measuring range, 2,5...70 L/min oil
[U0]: Contact, 1 SPDT
[N25]: Connection, 1 NPT female

Flowindicator
MODEL: DAH-2-2-03H-N-15
BRAND: KOBOLD
DAH-2:
Operating principle, sight glass
Mounting position, all directions
Flow direction, in direction of the arrow
Max. temperature, 100 °C
Max. pressure, 16 bar
2: Material (housing/connection), st. st.
03H: Nom. diameter, 1/2" (Qn:31.5 l/min)
N: Thread, NPT-thread female
15: Connection, 1/2"
Datasheet:
http://www.koboldmessring.com/fileadmin/koboldfiles/pdf/gb/s6gb_dah-1.pdf