<div>FTh 160 Ch D442 (64343442)</div>

<div>•<span> </span>TERMÓMETROS CON GAS PARA APLICACIONES QUÍMICAS</div>

<div>•<span> </span>Marca: AFRISO (Alemania)</div>

<div>•<span> </span>Vivienda Ø: 6''(160 mm)</div>

<div>•<span> </span>Carcasa: acero inoxidable 304 con bisel de ventana de cristal instrumento de calidad de tipo bayoneta,</div>

<div>•<span> </span>Vástago: Acero inoxidable 321,</div>

<div>•<span> </span>Diámetro bulbo:10 mm</div>

<div>•<span> </span>Relleno: relleno de gas a presión</div>

<div>•<span> </span>Rango: 0 a 60 º C</div>

<div>•<span> </span>Grado de protección: IP65</div>

<div>•<span> </span>Precisión: Clase 1 según EN 13190</div>

<div>•<span> </span>Montaje: Soporte de Pared</div>

<div></div>

<div>64527(240 mm)</div>

<div>•<span> </span>Longitud del bulbo Termómetro: 240 mm + Hilo</div>

<div></div>

<div>64464(3m)</div>

<div>•<span> </span>TUBO CAPILAR: ACERO INOXIDABLE 316</div>

<div>•<span> </span>3 metros</div>

<div></div>

<div>64460</div>

<div>•<span> </span>Conexión Termómetro Fija Macho: G½B</div>

Modelo: 2002AV<br />
MAGNEHELIC - MANOMETRO PRESION DIFERENCIAL<br />
Dual Scale Air Velocity Units<br />
For use with pitot tube<br />
MARCA: DWYER INSTRUMENTS<br />
Range, in w.c./ Velocity F.P.M.: 0-2.0/1000-5600<br />
Conexión: 1/8 NPT hembra<br />
Dial: 4" <br />
Precisión: +/-4%
<div>
<div class="gtx-trans-icon"></div>
</div>

SERVOPRO-MULTIEXACT-4100(O2Purity)<br />
GAS PURITY ANALYSER (SERVOPRO MultiExact 4100)<br />
Supply: European Power Lead<br />
Gas Module 1: Paramagnetic O2 Purity (0-100% O2)<br />
Module 1 Flowmeter:  500ml/min (Sample)<br />
Module 1 Filter  <br />
Filter Required<br />
Analogue Outputs: Gas Module 1 mA Analogue Output    <br />
Mounting: 19" Rack Mount Ears Only<br />
MONITORING PERFORMANCE<br />
Accuracy (intrinsic error) <0.01% O2<br />
Repeatability <0.01% O2<br />
Zero drift/week <0.01% O2<br />
T90 in secs <10@200ml/min<br />
 

SERVOPRO-MULTIEXACT-4100(CO-CO2-ppm)<br />
• GAS PURITY ANALYSER (SERVOPRO MultiExact 4100)<br />
• Supply European Power Lead<br />
• Gas Module 1: 1210D GFX 0-50/500vpm CO2, Infrared (Gfx)<br />
• Gas Module 2: 1210D GFX 0-50/500vpm CO, Infrared (Gfx)<br />
• Module 1 Flowmeter: 2500ml/min (Sample) 1210D<br />
• Module 2 Flowmeter: 2500ml/min (Sample) 1210D<br />
• Analogue Outputs: Gas Module 1 mA Analogue Output    <br />
• Analogue Outputs: Gas Module 2 mA Analogue Output          <br />
• Mounting: 19" Rack Mount Ears Only<br />
• MONITORING PERFORMANCE

FLOTECT FLOAT SWITCH<br />
Brand: DWYER<br />
Brass body, side wall mounting<br />
Service: Liquids compatible with wetted materials.<br />
Wetted Materials: Float and Rod: 316 SS; Body: Brass <br />
Magnet Keeper: 430 SS standard<br />
Temperature Limits: 4 to 275°F (-20 to 135°C) standard<br />
Pressure Limit: Brass body 1000 psig (69 bar)<br />
Standard float rated 100 psig (6.9 bar)<br />
Enclosure Rating: Weatherproof and Explosion-proof. **Listed with UL and CSA<br />
for Class I, Groups C and D; Class II, Groups E, F, and G.<br />
ATEX 0344 II 2 G Ex d IIB T6 Gb -20°C≤Tamb≤73°C.<br />
Switch Type: SPDT snap switch standard,<br />
Electrical Rating: UL, FM, ATEX and IECEx.<br />
Electrical Connections: UL and CSA models: 16 AWG, 6" (152 mm) long. ATEX and IECEx unit: terminal block.<br />
Conduit Connection: 3/4" (19.05 mm) female NPT standard or M25 with –BSPT option.<br />
Process Connection: 1-1/2" (38.10 mm) male NPT or 1-1/2" (38.10 mm) male<br />
BSPT standard, 2-1/2" (63.50 mm) male NPT <br />
Mounting Orientation: Horizontal installation standard, optional vertical top mount.<br />
Dead Band: 3/4" (19 mm) for standard float.<br />
Specific Gravity: 0.7 minimum with standard float. For other floats see model chart.<br />
Weight: 4 lb 9 oz (2.07 kg).<br />
Agency Approvals: ATEX, CE, CSA, FM, IECEx, UL**.<br />
****L4 TOP MOUNTED HSG L4 /L4-TOP V=18 Inches H=1 Inches***

MINIATURE USB DATA LOGGER<br />
Input type: Temperature/Humidity/Dew Point<br />
MARCA: DWYER INSTRUMENTS<br />
SPECIFICATIONS<br />
Temperature Range: MTL30: -40 to160°F (-40 to 70°C), 0% to 99% RH(non condensing).<br />
Accuracy: MTL20: ±1°F (±0.5°C); MTL30: ±1°F (±0.5°C), ±2% RH from10% to 90% RH.<br />
Resolution:  Non-LCD models: 0.01°F (0.01°C), 0.01% RH; LCD models: 0.1°F (0.1°C), 0.1% RH.<br />
Memory Size: 43,344 temperature; 21,672 each temperature and RH.<br />
Sampling Mode: Stop on memory full or memory rollover for continuous recording.<br />
Sampling Rate: 1 s to 18 hrs.<br />
Computer Requirements: Windows® based application software included.<br />
Power Requirements: 3 V CR2032 lithium metal battery, installed  functional, user replaceable.<br />
Alarms: Programmable high/low.<br />
Interface: USB port (cable included).<br />
Weight: 1 oz (28 g).<br />
Agency Approvals: CE.<br />
NO DISPLAY

<strong>EXPRESS ENCODER<br />
Brand: BEI SESNSORS<br />
Model: XHS35F-100-R2-SS-1200-ABZC-28V/V-SM18</strong><br />
HS = Hollow Shaft<br />
35 = 3.5” Encoder Diameter<br />
F = HOUSING CONFIG: Standard<br />
100 = SHAFT BORE: 1.00”<br />
R2 = TETHER: Tether Arm<br />
SS = SHAFT SEAL CONFIGURATION: Through Shaft Rubber Seals<br />
1200  = CYCLES PER TURN: 1200<br />
ABZC = NO. OF CHANNELS:<br />
28V/V = VOLTAGE/OUTPUT: 5–28Vin/out<br />
SM18 = OUTPUT TERMINATION: MS3102R18-1P

THERMAL DISPERSION FLOW SWITCH<br />
TDFS-1-P-06<br />
Brand: dwyer<br />
[TDFS]: series, Thermal Dispersion Flow Switch.<br />
[1]: construction, 316SS and Polysulfone Body.<br />
 [P]: cable type, PVC Jacketed Cable.<br />
 [06]: cable length, 6 Ft. Cable.<br />
Wetted Materials:  316 SS, Polysulfone, and FKM.<br />
 Setpoint Range: 0.5 to 10 ft/s (0.15 to 3.0 m/s).<br />
Repeatability: 0.07 ft/s +3% of setpoint.<br />
Typical Deadband: 0.1 ft/s +15% of setpoint.<br />
Temperature Limits: Process: 5 to 185°F (-15 to 85°C) (non-freezing); Ambient: 5 to 167°F (-15 to 75°C), Storage: -40 to 185°F (-40 to 85°C).<br />
Pressure Limits: 300 psig (20.67 bar).<br />
Response Time: Approximately 8 s.<br />
Power Requirement: 9 to 24 VDC.<br />
Switching Current: 400 mA, derate 5 mA/°C above 23°C<br />
Current Consumption: Average: 93 mA, Peak: 300 mA.<br />
Electrical Connection: 4 conductor 22 AWG, 6" (1.83 m) long with cable gland.<br />
Process Connection: 1/2 " NPT male.<br />
Enclosure Rating: NEMA 4X (IP65).<br />
Housing Materials: 316 SS, 416 SS, polycarbonate, neoprene, and acrylated urethane.<br />
Switch Type: 1 NO NPN, 1 NC NPN.<br />
Input Power and Protection: 0.5A fuse (resettable) reverse polarity protected.<br />
Switched Output Protection: 0.5 A fuse (resettable) reverse polarity protected

<strong>5200 (With Link Bluetooth)<br />
TERMO-ANEMOMETRO</strong><br />
• Marca: KESTREL<br />
• para monitoreo condiciones termo ambientales<br />
• High Viz Green – With Link Bluetooth

<strong>Modelo: 5200 (No Link)<br />
TERMO-ANEMOMETRO</strong><br />
• Marca: KESTREL<br />
• para monitoreo condiciones termo ambientales<br />
• High Viz Green – No Link

DIFFERENTIAL PRESSURE TRANSMITTER<br />
Same Size as Standard Magnehelic® Differential Pressure Gage<br />
Range: 3.00" w.c., 746 Pa, 76.2 mm w.c., 7.46 mbar, .746 kPa, .108 psi<br />
Brand: DWYER <br />
Service: Air and non-combustible, compatible gases.<br />
Wetted Materials: Consult factory.<br />
Accuracy: ±1% FS at 70°F.<br />
Stability: ±1% FS/yr.<br />
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).<br />
Pressure Limits: 10 psig (0.69 bar).<br />
Thermal Effect: ±0.055% FS/°F (0.099% FS/°C).<br />
Power Requirements: 10 to 35 VDC (2 wire).<br />
Output Signal: 4 to 20 mA.<br />
Zero and Span Adjustments: Digital push-button zero and span.<br />
Loop Resistance: DC: 0 to 1250 " maximum.<br />
Current Consumption: DC: 38 mA max.<br />
Electrical Connections: Screw-type terminal block.<br />
Display: 3.5 digit LCD, 0.7" H.<br />
Process Connections: 1/8" ID tubing.<br />
Mounting Orientation: Vertical.<br />
Weight: 4.8 oz (136 g).

GFC-2108<br />
GAS MASS FLOW CONTROLLER<br />
Brand: DWYER (USA)<br />
Range 0-2 LPM.<br />
Specified flow range is for an equivalent flow of nitrogen at 70°F (21°C) @ 760 mm Hg<br />
1/4" compression fitting
<div>
<div class="gtx-trans-icon"></div>
</div>

<div>TW TURBINE FLOW METER</div>

<div>•<span> </span>Brand: AW LAKE</div>

<div>•<span> </span>Range: 15 -180 GPM</div>

<div>•<span> </span>K Factor: 330</div>

<div>•<span> </span>Porting: 2” Male NPT</div>

<div>•<span> </span>Pressure Rating: 5000 PSI </div>

<div>MATERIALS OF CONSTRUCTION</div>

<div>•<span> </span>Body 316 Stainless Steel</div>

<div>•<span> </span>Rotor CD4MCU Stainless Steel</div>

<div>•<span> </span>Rotor Shaft Tungsten Carbide</div>

<div>•<span> </span>Rotor Support 316 Stainless Steel</div>

CARBON MONOXIDE TRANSMITTER<br />
Brand: DWYER(USA)<br />
[CMT-WR-WP]: model, configuration: NEMA 4X Wall.<br />
External Display: No<br />
Alarm/Buzzer: Yes<br />
Range: 0 to 125 PPM CO.<br />
Accuracy: ±2.5% of reading.<br />
Repeatability: ±1% of reading.<br />
Response Time: Less than 60 seconds typical for 90% step change.<br />
Ambient Operating Temperature: -4 to 104°F (-20 to 40°C).<br />
Ambient Operating Humidity: 15 to 90% non-condensing.<br />
Power Requirements: 24 VDC/VAC at 100 mA.<br />
Internal Display: Two line 8-digit alphanumeric LCD.<br />
Sensor: Electrochemical (2 to 3 year expected life typical).<br />
Output: Current/voltage: 4 to 20 mA and 2 to 10 VDC; Optional relay: (2) SPDT 1 Amp dry contact; Buzzer: 85 dB @ 1 foot.<br />
Coverage Area: 7500 square feet (max).<br />
Weight: 5.7 oz (161.6 g).

CDTR 2-D-4-0-4-RLY<br />
Brand: Dwyer.<br />
[CDTR]: series, Carbon dioxide/RH/temperature transmitter.<br />
[2]: Range, 0 to 2000 ppm CO2 range.<br />
[D]: Configuration, Duct mount.<br />
[4]: CO2 Output, 4 to 20 mA / 0 to (5 or 10) VDC.<br />
[0]: Temperature Output, None.<br />
[4]: RH Output, 4 to 20 mA / 0 to (5 or 10) VDC.<br />
[RLY]: Relay<br />
Accuracy: ±40 ppm + 3% of reading (CO2); ±2% (RH).<br />
Temperature Dependence: ±8 ppm / °C at 1100 ppm.<br />
Non-Linearity: 16 ppm.<br />
Pressure Dependence:  0.13% of reading per mm of Hg.<br />
Response Time: 2 minutes for 99% step change.<br />
Temperature Limits: 32 to 122°F (0 to 50°C).<br />
Duct Air Velocity Range: 0-4000 FPM (20.32 m/s)<br />
Humidity Limits: 10 to 95% RH (noncondensing).<br />
Power Requirements: 16 to 35 VDC / 19 to 28 VAC.<br />
Power Consumption: Average: 2 watts; Peak: 3.75 watts.<br />
Sensor: Single beam, dual-wavelength NDIR.<br />
Output: Current: 4 to 20 mA (max 500 Ω); Voltage: 0 to 5 VDC or 0 to 10 VDC (min 500 Ω); Relay: SPST NO 2 A @ 30 VDC; RTD or thermistor per r-t curves (depending on model).<br />
Weight: 5.6 oz (158.8 g).

<div>MEDIDOR DE TEMPERATURA PARA ALIMENTOS</div>

<div>•<span> </span>Marca (Intrial) Fabricado en Alemania</div>

<div>•<span> </span>Sonda con manija, contiene RTD 1 x Pt 100 Ohm DIN EN 60751,class B,</div>

<div>•<span> </span>Bulbo de ø 3 mm, con Punta de inserción</div>

<div>•<span> </span>Material en acero inoxidable</div>

<div>•<span> </span>Longitud total de 75mm</div>

<div>•<span> </span>Con manija hecho en PVC</div>

<div>•<span> </span>Con 6 metros de cable siliconado protegido( PFA/shield/Silicone)</div>

<div>•<span> </span>Color negro y conectores libres para instalar en PLC o sistema de control</div>

<div>•<span> </span>Rango de trabajo del sensor:  -40 to +150°C,</div>

<div>•<span> </span>Rango de la manija: 0 - 80°C,</div>

<div>•<span> </span>***Nota. - Fabricación de acuerdo a Foto***</div>

WMT2-A-C-02<br />
MEDIDOR DE FLUJO (5/8 x 3/4")<br />
Marca: DWYER INSTRUMENTS<br />
Serie WMT <br />
Conexión: 3/4” NPT<br />
Flujo máximo: 20 GPM<br />
Rango de flujo nominal: 1 a 20 GPM<br />
With pulse output<br />
Electrical Rating: 0.01 A @ 24 VAC/DC.<br />
Orientación de montaje: Horizontal..
<div>
<div class="gtx-trans-icon"></div>
</div>

WMT2-A-C-01<br />
MEDIDOR DE FLUJO (5/8 x 1/2)<br />
Marca: DWYER INSTRUMENTS<br />
Serie WMT <br />
Conexión: 1/2” NPT<br />
Flujo máximo: 20 GPM<br />
Rango de flujo nominal: 1 a 10 GPM<br />
With pulse output<br />
Electrical Rating: 0.01 A @ 24 VAC/DC.<br />
Orientación de montaje: Horizontal.
<div>
<div class="gtx-trans-icon"></div>
</div>

<div>SENSOR DE TEMPERATURA PT 100</div>

<div>•<span> </span>Conexión a proceso: Rosca ½” NTP</div>

<div>•<span> </span>Escala temperatura: -50° a 300°C</div>

<div>•<span> </span>Longitud1:  9.5 cm</div>

<div>•<span> </span>Longitud2: 10.0 cm</div>

<div>•<span> </span>Diámetro Bulbo: 1 cm</div>

<div>•<span> </span>Marca: Intrial (Fabricación Alemana)</div>

<div>**Fabricación según esquema enviado**</div>

Resistance Thermometer Pt100/0, single<br />
Brand: HERTH<br />
4-wire circuit<br />
Shank length: 310 mm<br />
Cabe length:15 meters<br />
Accessories:Spring clamping unionwith screw reducing union G 1/4A