Thermal dispersion flow, 3 Pulg,

<div>FSW-6212</div>

<div>Thermal dispersion flow<br />
switch, 85 to 240 Vac power<br />
process connection: 3" NPT<br />
enclosure: Glass filled nylon, 1" NPT conduit, cable, gland, and 2 m (6.5') cable<br />
Insertion Length: 51 mm (2"), for 1 to 4" pipe<br />
SPECIFICATIONS<br />
Accuracy: }10% of setpoint<br />
Repeatability: }1% of setpoint<br />
Power Supply:<br />
FSW-6000: 85 to 240 Vac (50/60 Hz)<br />
FSW-7000: 24 Vdc }10%<br />
Temperature Range:<br />
Process: -20 to 80°C (-4 to176°F<br />
[sanitary option to 120°C (248°F) for CIP]<br />
Operating: -20 to 60°C (-4 to140°F)<br />
Maximum Pressure: 300 bar<br />
(4351 psi)<br />
Protection Class: NEMA 4 (IP65)<br />
Wetted Materials: 316 SS<br />
Enclosure Material: Glass filled nylon<br />
standard or aluminum die cast option<br />
Process Connection:<br />
1/2 to 11/2 NPT, Tri-GripTM, or flange<br />
(others available, consult Flow<br />
Engineering Department)<br />
Output: 250 Vac SPDT 5 A relay<br />
Switch Point Adjustment: Potentiometer<br />
Bargraph:<br />
Green LED: Flow rate above setpoint<br />
Yellow LED: Flow is at above setpoint<br />
Red LED: Flow is below setpoint<br />
Switch Point Status:<br />
Red LED: No flow<br />
Green LED: Flow<br />
Response Time: 1 to 10 seconds<br />
Maximum Start up Delay: 12 seconds<br />
Switching Range:<br />
3 cm/s to 3 m/s (0.09 to 9.84 ft/sec)<br />
(liquid), 5 cm/sec to 15 m/sec<br />
(0.16 to 49 ft/sec) (gas)<br />
Dimensions:<br />
Nylon Head: 88 Dia x 80 mm H<br />
(3.5 x 2.5" H)<br />
Aluminum Head: 88 Dia x 108 mm H<br />
(3.5 x 4.25")<br />
Insertion Length: 13/8", 2 and 3" standard,<br />
for other lengths consult Flow Engineering<br />
Weight: Approx 680 g (1.5 lb)</div>