MULTI-JET HOT WATER METER<br />
 MARCA: DWYER INSTRUMENTS<br />
2" pipe size<br />
Max Flow: 160 GPM<br />
Nominal Flow Range: 8 to 160 GPM<br />
1 gal pulse output<br />
Temperature Limit: 190°F (88°C).
<div>
<div class="gtx-trans-icon"></div>
</div>

FLUJOMETRO EN POLICARBONATO<br />
Marca: DWYER<br />
RMA 2" escala<br />
Con  válvula en Acero Inoxidable<br />
24: Rango:  5 a 70 LPM;  Aire<br />
Proceso de conexión: 1/8"<br />
Precision: 4%<br />
Límite de temperatura: 130°F (54°C)<br />
Límite de presión: 100 psi (6,9 bar)<br />
Materiales en contacto: Cuerpo: en policarbonato<br />
O-ring: neopreno y buna-N<br />
Piezas de metal: Acero Inoxidable<br />
Flotador: Acero Inoxidable

VANE OPERATED FLOW SWITCH<br />
Brand: DYWER<br />
Service: Gases or liquids compatible with wetted materials.<br />
Vane: 316 SS;<br />
Body: 316 SS standard;<br />
Temperature Limit: -4 to 275°F (-20 to135°C) standard,<br />
ATEX and IECEx options,<br />
Ambient temperature -4 to 163°F (-20 to 73°C);<br />
Process temperature -4 to 163°F (-20 to 73°C).<br />
Pressure Limit: 316 SS body 2000 psig (138 bar),<br />
available with 316 SS body and SPDT switch only.<br />
Switch Type: DPDT contact.<br />
Electrical Connections: UL and CSA models: 16AWG,<br />
6" (152 mm) long. ATEX and IECEx unit:Terminal block.<br />
Process Connection: 1 1/2" male NPT.<br />
Mounting Orientation: Within 5° of vertical for proper operation.<br />
Units for horizontal installation (vertical pipe with up flow) available.<br />
Set Point Adjustment: For universal vane: five vane combinations.<br />
Agency Approvals: ATEX, CE, CSA, FM, IECEx, UL<br />
Electrical Rating: UL, FM, ATEX and IECEx models 10A @ 125/250 VAC<br />
V: Vertical up flow, option for upward flow in vertical pipe<br />
****Instalacion horizontal del equipo para tuberia vertical****

MULTI-JET BRASS BODY WATER METER<br />
NSF Certified, Lead Free, Economical<br />
Brand: DWYER (USA)<br />
Coupling Size: 1-1/2" NPT<br />
GPM (Gallons Per Minute)<br />
Max Flow: 100<br />
Nominal Flow Range: 5 to 100<br />
Transitional Flow: 1.25<br />
Service: Water.<br />
Wetted Materials: Body: ECO BRASS®; Couplings: ECO BRASS®; Measuring<br />
Chamber: ABS Plastic.<br />
Flow Range: See model chart.<br />
Accuracy: Transitional Flow: ± 3%; Nominal Flow: ±1.5%.<br />
Temperature Limit: 122°F (50° C).<br />
Pressure Limit: 150 psi (10 bar).<br />
Totalizing Display Maximum: See model chart.<br />
Output Signal: Pulse output with frequency proportional to flow rate.<br />
Pulse Options: 0.1 gal, 1 gal, 10 gal, 100 gal per pulse.<br />
Electrical Rating: 0.01 A @ 24 VAC/DC.<br />
Electrical Connections: Color-coded lead wires, 4.5´ (1.5 m) long.<br />
Mounting Orientation: Horizontal with register facing up.<br />
Weight: See dimension chart.<br />
Agency Approvals: NSF

VANE OPERATED FLOW SWITCH<br />
Brand: DYWER<br />
Service: Gases or liquids compatible with wetted materials.<br />
Vane: 316 SS;<br />
Body: 316 SS standard;<br />
Temperature Limit: -4 to 275°F (-20 to135°C) standard,<br />
ATEX and IECEx options,<br />
Ambient temperature -4 to 163°F (-20 to 73°C);<br />
Process temperature -4 to 163°F (-20 to 73°C).<br />
Pressure Limit: 316 SS body 2000 psig (138 bar),<br />
available with 316 SS body and SPDT switch only.<br />
Switch Type: DPDT contact.<br />
Electrical Connections: UL and CSA models: 16AWG,<br />
6" (152 mm) long. ATEX and IECEx unit:Terminal block.<br />
•Process Connection: 1 1/2" male NPT.<br />
Mounting Orientation: Within 5° of vertical for proper operation.<br />
Units for horizontal installation (vertical pipe with up flow) available.<br />
Set Point Adjustment: For universal vane: five vane combinations.<br />
Agency Approvals: ATEX, CE, CSA, FM, IECEx, UL<br />
Electrical Rating: UL, FM, ATEX and IECEx models 10A @ 125/250 VAC<br />
Conduit Connection: Incluye adaptador de 3/4" a ½ “ NPT (A-2024-6)<br />
V: Vertical up flow, option for upward flow in vertical pipe<br />
****Instalacion horizontal del equipo para tuberia vertical****

SIGHT FLOW INDICATOR<br />
Brand: DWYER<br />
Tube type with 8 blade<br />
Acetal impeller and integral wipers to clean<br />
Tube interior, tempered borosilicate tube<br />
Fluoroelastomer gaskets<br />
Body Style: 316SS body<br />
Body Size: 1 Inch female NPT connection size<br />
Service: Compatible gases and liquids<br />
Temperature Limit: 212°F (100°C)<br />
Pressure Limit: 230 psig (15.86 bar)<br />
Connections: Threaded.

COMPACT ULTRASONIC FLOWMETERS<br />
Brand: Dwyer<br />
Service: Clean water with < 3% by volume of particulate content.<br />
Range: 0.33 to 32.8 ft/s (0.1 to 10 m/s).<br />
Display: Backlit: 3.27" H x 0.74" W (83.1 mm x 18.8 mm), 2 line x 16 characters.<br />
Accuracy: ±3% of flow reading for > 0.98 ft/s (> 0.3 m/s).<br />
Power Requirements: 12 to 24 VDC or VAC.<br />
Power Consumption: 7 W max.<br />
Temperature Limits: Process: 32 to 185°F (0 to 85°C); Ambient: 32 to 122°F (0 to 50°C).<br />
Outputs: Analog: 1 opto-isolated: 4 to 20 mA; Error current: 3.5 mA; Load resistance: 620 Ωmax; Pulse: 1 optoisolated MOSFET relay, 500 mA max, 166 pps max, 200 Hz max.<br />
Enclosure Rating: IP54.<br />
Enclosure Material: Plastic polycarbonate.<br />
Repeatability: ±0.5% of measured value.<br />
Electrical Connections: 16.4´ (5 m) cable.<br />
Response Time: < 1 s.<br />
Weight: 2.9 lb (1.315 kg).<br />
Agency Approvals: CE.<br />
Applicable Pipe Material: Steel, copper, or plastic.<br />
Pipe Outside Diameter: 0.98 to 4.62" (24.89 to 117.35 mm).<br />
Applicable Pipe Lining: None.<br />
Pipe Wall Thickness: 0.02 to 0.39" (0.5 to 10 mm).

FLOW MONITOR<br />
• SN series<br />
• Brand: UFM<br />
• Range: rango  0-3GPM

FLOW DIVIDER PR 307-N<br />
• Model: PR 307-N    <br />
• 2-section flow divider<br />
• max. inlet flow: 80 l / min<br />
• max. working pressure continuous: 210 bar<br />
• with inductive sensor BES 516-300-S135-D-PU05<br />
• and viton seals<br />
• including mounting feet<br />
• net weight: 7,1 kg / a piece

MMA-21<br />
FLOWMETER, 0.25 - 2.5 LPM AIR, 100 psi (6.9 bar)<br />
Brand: DWYER INSTRUMENTS<br />
Range: 0.25 - 2.5 LPM AIR<br />
Service: Compatible gases and liquids.<br />
Wetted Materials: Body: Nylon 12; O-rings: Buna-N (optional materials available);<br />
Float: Black glass, K monel, stainless steel, tungsten carbide.<br />
Temperature Limit: 130°F (54°C).<br />
Pressure Limit: 100 psi (6.9 bar) with compression fitting. 50 psi (3.4 bar) withtubing clamp.<br />
Accuracy: ±4% FS.<br />
Process Connection: 5/16" OD for push on rubber or plastic tubing with provided spring tubing clamp. Connect to rigid tubing with double compression fitting.<br />
Weight: 1 oz (28.35 g).<br />
Agency Approvals: Meets the technical requirements of EU Directive 2011/65/EU(RoHS II).)

THERMAL DISPERSION FLOW SWITCH<br />
TDFS-1-P-06<br />
Brand: dwyer<br />
[TDFS]: series, Thermal Dispersion Flow Switch.<br />
[1]: construction, 316SS and Polysulfone Body.<br />
 [P]: cable type, PVC Jacketed Cable.<br />
 [06]: cable length, 6 Ft. Cable.<br />
Wetted Materials:  316 SS, Polysulfone, and FKM.<br />
 Setpoint Range: 0.5 to 10 ft/s (0.15 to 3.0 m/s).<br />
Repeatability: 0.07 ft/s +3% of setpoint.<br />
Typical Deadband: 0.1 ft/s +15% of setpoint.<br />
Temperature Limits: Process: 5 to 185°F (-15 to 85°C) (non-freezing); Ambient: 5 to 167°F (-15 to 75°C), Storage: -40 to 185°F (-40 to 85°C).<br />
Pressure Limits: 300 psig (20.67 bar).<br />
Response Time: Approximately 8 s.<br />
Power Requirement: 9 to 24 VDC.<br />
Switching Current: 400 mA, derate 5 mA/°C above 23°C<br />
Current Consumption: Average: 93 mA, Peak: 300 mA.<br />
Electrical Connection: 4 conductor 22 AWG, 6" (1.83 m) long with cable gland.<br />
Process Connection: 1/2 " NPT male.<br />
Enclosure Rating: NEMA 4X (IP65).<br />
Housing Materials: 316 SS, 416 SS, polycarbonate, neoprene, and acrylated urethane.<br />
Switch Type: 1 NO NPN, 1 NC NPN.<br />
Input Power and Protection: 0.5A fuse (resettable) reverse polarity protected.<br />
Switched Output Protection: 0.5 A fuse (resettable) reverse polarity protected

GFC-2108<br />
GAS MASS FLOW CONTROLLER<br />
Brand: DWYER (USA)<br />
Range 0-2 LPM.<br />
Specified flow range is for an equivalent flow of nitrogen at 70°F (21°C) @ 760 mm Hg<br />
1/4" compression fitting
<div>
<div class="gtx-trans-icon"></div>
</div>

<div>TW TURBINE FLOW METER</div>

<div>•<span> </span>Brand: AW LAKE</div>

<div>•<span> </span>Range: 15 -180 GPM</div>

<div>•<span> </span>K Factor: 330</div>

<div>•<span> </span>Porting: 2” Male NPT</div>

<div>•<span> </span>Pressure Rating: 5000 PSI </div>

<div>MATERIALS OF CONSTRUCTION</div>

<div>•<span> </span>Body 316 Stainless Steel</div>

<div>•<span> </span>Rotor CD4MCU Stainless Steel</div>

<div>•<span> </span>Rotor Shaft Tungsten Carbide</div>

<div>•<span> </span>Rotor Support 316 Stainless Steel</div>

WMT2-A-C-02<br />
MEDIDOR DE FLUJO (5/8 x 3/4")<br />
Marca: DWYER INSTRUMENTS<br />
Serie WMT <br />
Conexión: 3/4” NPT<br />
Flujo máximo: 20 GPM<br />
Rango de flujo nominal: 1 a 20 GPM<br />
With pulse output<br />
Electrical Rating: 0.01 A @ 24 VAC/DC.<br />
Orientación de montaje: Horizontal..
<div>
<div class="gtx-trans-icon"></div>
</div>

WMT2-A-C-01<br />
MEDIDOR DE FLUJO (5/8 x 1/2)<br />
Marca: DWYER INSTRUMENTS<br />
Serie WMT <br />
Conexión: 1/2” NPT<br />
Flujo máximo: 20 GPM<br />
Rango de flujo nominal: 1 a 10 GPM<br />
With pulse output<br />
Electrical Rating: 0.01 A @ 24 VAC/DC.<br />
Orientación de montaje: Horizontal.
<div>
<div class="gtx-trans-icon"></div>
</div>

Paddle Type Flow Switch<br />
Housing material:Aluminum Alloy, IP 65<br />
Operation temp:-30 C~150 C<br />
Wetted material: SUS304<br />
Operation pressure: Max.355 PSIG<br />
Pressure drop allowance: 3 PSIG<br />
Set point tolerance: K25%<br />
Repeatability tolerance: K5%<br />
Contact capacity: 60W 220Vac/200Vdc, SPDT<br />
SFX10000: 1800 SERIES<br />
A1: A1<br />
E: Housing(Aluminum, 1/2"PF-88x84)<br />
AC: connection(ANSI)<br />
A8: connection(1")<br />
07: connection(NPT)<br />
MB: Material(SUS 316)<br />
X: Paddle length(STANDARD)

<div>TW TURBINE FLOW METER</div>

<div>•<span> </span>Brand: AW LAKE<br />
. Model: TW-150M-6K</div>

<div>•<span> </span>Range: 15 -180 GPM</div>

<div>•<span> </span>K Factor: 330</div>

<div>•<span> </span>Porting: 1 1/2” Male NPT</div>

<div>•<span> </span>Pressure Rating: 5000 PSI </div>

<div>MATERIALS OF CONSTRUCTION</div>

<div>•<span> </span>Body 316 Stainless Steel</div>

<div>•<span> </span>Rotor CD4MCU Stainless Steel</div>

<div>•<span> </span>Rotor Shaft Tungsten Carbide</div>

<div>•<span> </span>Rotor Support 316 Stainless Steel</div>

<div>TURBINE FLOW METER</div>

<div>•<span> </span>Brand: AW LAKE<br />
  Model: TW-100M-2K</div>

<div>•<span> </span>Range: 5 -50 GPM</div>

<div>•<span> </span>K Factor: 870</div>

<div>•<span> </span>Porting: 1” Male NPT</div>

<div>•<span> </span>Pressure Rating: 5000 PSI </div>

<div>MATERIALS OF CONSTRUCTION</div>

<div>•<span> </span>Body 316 Stainless Steel</div>

<div>•<span> </span>Rotor CD4MCU Stainless Steel</div>

<div>•<span> </span>Rotor Shaft Tungsten Carbide</div>

<div>•<span> </span>Rotor Support 316 Stainless Steel</div>

<div> TURBINE FLOW METER</div>

<div>•<span> </span>Brand: AW LAKE<br />
Modelo; TW-100M-1K</div>

<div>•<span> </span>Range: 3 -30 GPM</div>

<div>•<span> </span>K Factor: 3100</div>

<div>•<span> </span>Porting: 1” Male NPT</div>

<div>•<span> </span>Pressure Rating: 5000 PSI </div>

<div>MATERIALS OF CONSTRUCTION</div>

<div>•<span> </span>Body 316 Stainless Steel</div>

<div>•<span> </span>Rotor CD4MCU Stainless Steel</div>

<div>•<span> </span>Rotor Shaft Tungsten Carbide</div>

<div>•<span> </span>Rotor Support 316 Stainless Steel</div>

<div>OPTIFLUX 4300C<br />
MEDIDOR DE CAUDAL MAGNETICO OPTIFLUX<br />
• 4300C DN100 / 4"<br />
• FAB. KROHNE AG<br />
• Tubo sensor: OPTIFLUX 4000 F<br />
• Para líquidos eléctricamente conductivos:<br />
• Estándar: >=1 uS/cm<br />
• Agua desmineralizada: >=20 uS/cm<br />
• Repetibilidad: ±0,1% del valor medido, mínimo 1 mm/s<br />
• Versión: Compacta (convertidor IFC 300C)<br />
• Montaje en tubería: DN100 / 4"<br />
• Conexión Proceso: PN16 EN 1092-1<br />
• Temperatura de proceso: -5°... +60°C<br />
• Rango de medición: -12... 12 m/s<br />
• Material:<br />
• Tubo sensor: Chapa de acero<br />
• Bridas: Acero al carbono<br />
• Recubrimiento interno: Goma suave<br />
• Electrodos (fijos): Goma conductiva</div>

<div>• Incluye:<br />
• Anillos de aterramiento en acero inoxidable #3<br />
• Certificado de calibración estándar<br />
• Grado de protección: IP 66/67 (NEMA 4/4X/6)<br />
        CONVERTIDOR IFC300C:<br />
• Versión: Compacto (Convertidor montado en tubo sensor)<br />
• Alimentación: 100 - 240VAC.<br />
• Precisión: 0.15% del valor medido<br />
• Sólidos en suspensión: <70%<br />
• Conexión eléctrica: 3xM20x1.5<br />
• Salidas:<br />
• 4...20mA/HART + Pulsos/Frecuencia + Estado/Control.</div>