<div>Sentry ISOLOK Model M4KSA Automatic Point Sampler, consisting of:</div>

<div>M4KSA ===></div>

<div>•<span> </span>3A approved through third party verification.  Compliant to section 59-00</div>

<div>•<span> </span>316 stainless steel sampler body with 1-1/2” tri-clamp style line mounting interface (clamp and  gasket not included; see line adapter)</div>

<div>•<span> </span>Plunger – 3/4” diameter 316 stainless steel</div>

<div>•<span> </span>Sample Annulus - 2cc fixed sample volume per cycle</div>

<div>•<span> </span>Plunger Seals – FDA/3A approved Buna-N</div>

<div>•<span> </span>Compressed Air Request:  2 SCFM (80 to 120 Psi)</div>

<div>•<span> </span>Pressure Line:  100 Psi as Maximum</div>

<div>•<span> </span>Sample Discharge – 24mm female threaded, 8 TPI (threads per inch) integral to sampler body</div>

<div>•<span> </span>Air Cylinder - Oil less industrial air cylinder, 1-1/2” diameter x 2” stroke with filled Teflon cylinder seals</div>

<div>Bottle ===></div>

<div>Sample Bottle Consisting of:</div>

<div>•<span> </span>500 cc High-Density Polyethylene bottle with 24mm bottle thread</div>

<div>Airset ===></div>

<div>Sentry Airset Consisting of: </div>

<div>•<span> </span>Airset  - 4-way general purpose 220-240 VAC / 50-60 Hz solenovalve.  Includes filter, pressure regulator, and pressure gauge.</div>

FF100-1.0-ST<br />
• Regulators for Non -Refillable cylinders<br />
• On/Off Knob with cylinder pressure gauge<br />
• Attachable cylinders: 34DA, 60DA, 103DS, 112DA<br />
• Valve: C10<br />
• Flow rate: 0.5 to 5.0 l/min - Regulable<br />
• Rango : 0 a 70 bar<br />
• Material. Stainless steel

<div>
<p class="MsoNormal" style="line-height:normal;">SENSOR DE PRESION DIFERENCIAL<br />
Marca: RITTAL<br />
3000 PSI<br />
MODELO 315<br />
4-20 MA<br />
CONECTOR CON CABLE DIN 43650<br />
///////////////////////////<br />
Differential Pressure Pressure Transmitter<br />
Output: 4-20mA<br />
Static Accuracy: ± 0.2% FSO BFSL<br />
Range: 0-3000 PSI<br />
Pressure Type: Differential<br />
Elect. Connector: DIN 43650 Form A (EN17531-803)<br />
W/mate (Hirsch Mann)<br />
Pressure Port: 1/4" NPT (F)<br />
Flange Girdle with 10,000 PSI Rating - Proof pressure to <br />
[10x FSO] up to [10,000 PSI] Burst [15X FSO] up to <br />
[10,500 PSI]<br />
Wetted Parts: 316 & 17-4 PH Stainless<br />
Body: 316 Stainless</p>

<p class="MsoNormal"></p>

<p></p>
</div>

SWITCH NIVEL TEMP<br />
•    Cat: TL008-156<br />
•    Marca: APCO<br />
•    Part Number: HUTL00855

TRANSMISOR DE PRESION,DMU03VM(31175)<br />
Marca: AFRISO(Alemania),<br />
• Principio de Medición: Piezo Resistivo,<br />
• Precisión: 0.35 % FSO (< 0.4 bar 0.5 %FSO),<br />
• Partes en contacto: Acero Inoxidable 316,<br />
• Conexión G1/2” tipo sello de Diafragma,<br />
• Salida: 4 a 20 mA,<br />
• Conexion Electrica: Conector y Caja segunISO 440,43650-A),<br />
• Alimentación: 8 a 32 VDC,<br />
• Rango de 0 a 25 bar

MANÓMETRO TIPO BOURDON<br />
•    Marca AFRISO(Alemania)<br />
•    RANGO: 0 to 1 bar/0 to 14.5 psi<br />
•    Diámetro de Carcasa 6''(160mm)<br />
•    Precisión 1.6(EN 837-1/6)<br />
•    Temperatura Operación Max 120°C  <br />
•    Conexión  INFERIOR,1/2 ''NPT<br />
•    Material: Caja y conexión en acero inoxidable<br />
•    Con/sin glicerina(Especificar al ordenar, no afecta el precio)

MODEL: FTh 160 Ch D442 (64375442)<br />
TERMÓMETROS CON GAS PARA APLICACIONES QUÍMICAS<br />
Marca: AFRISO (Alemania)<br />
Vivienda Ø: 6''(160 mm)<br />
Carcasa: acero inoxidable 304 con bisel de ventana de cristal instrumento de calidad de tipo bayoneta,<br />
Vástago: Acero inoxidable 321,<br />
Diámetro bulbo:10 mm<br />
Relleno: relleno de gas a presión<br />
Rango: 0 a 120 º C<br />
Grado de protección: IP65<br />
Precisión: Clase 1 según EN 13190<br />
Montaje: Soporte de Pared<br /><br />
64527(3)<br />
Longitud del bulbo Termómetro: 340 mm + Hilo<br /><br />
64464(2)<br />
TUBO CAPILAR: ACERO INOXIDABLE 316<br />
3 metros<br /><br />
64460<br />
Conexión Termómetro Fija Macho: G½B<br /><br />
THI-950-0340<br />
THERMOWELL AC. INOXIDABLE SS316<br />
Largo del bulbo 340 mm<br />
Conexion a instrumento: 1/2" G<br />
Conexion a proceso: 1'' NPT

KIT DE CALIBRACION PARA HCN<br />
096-3501:Calibration Kit (REACTIVE GASES CALIBRATION ACCESSORY KIT) Use this calibration kit for reactive gases, such as NH3 , CL2 or HCL. Includes Carrying Case, 0.5LPM Male Regulator and Teflon Tubing<br />
077-0278: Hydrogen Cyanide - 60DA/ 10 PPM in N2 / Teflon / use with reactive kit 096-3501           <br />
077-0019: Zero air - 60DA / 20.9% O2 in N2 / Tygon / Non-Reactive (096-3500 or 096-3502)<br />
096-3438: Meridian Calibration Adapter

Modelo : HMT25D-SS-12X8NB-S3-CW-SM18-S<br />
CODIFICADOR<br />
MARCA: BEI INDUSTRIAL ENC<br />
Part Number: 924-01090-044

RANGO : 0 a 400 bar/0 to 5800 psi,Manómetro tipo Bourdon,Marca AFRISO(Alemania),Diámetro de Carcasa 10''(250mm),Precisión 1.6(EN 837-1/6),-Temperatura operación Max 120°C  ,Conexión INFERIOR,1/2''NPT,Material:caja y conección en, acero inoxidable 1.4571.,con o/sin glicerina, especificar,al momento de ordenar 

Modelo: RF160F,D401(0 a 10 Bar/Psi)<br />
MANOMETRO PATRON TIPO BOURDON <br />
Marca: AFRISO (Alemania)<br />
Housing Ø: 160 mm<br />
Material Housing: Stainless steel 304 with bayonet bezel<br />
Measuring element: Copper alloy<br />
Precision: 0.25<br />
Conexion:1/2 npt<br />
Rango: 0 a 10 Bar<br />
Doble escala Bar/PSI
<div>
<div class="gtx-trans-icon"></div>
</div>

<div>Modelo: RF160F,D401(0 a 1 Bar)</div>

<div></div>

<div>MANOMETRO PATRON TIPO BOURDON </div>

<div>•<span> </span>Marca: AFRISO (Alemania)</div>

<div>•<span> </span>Housing Ø: 160 mm</div>

<div>•<span> </span>Material Housing: Stainless steel 304 with bayonet bezel</div>

<div>•<span> </span>Measuring element: Copper alloy</div>

<div>•<span> </span>Precision: 0.25</div>

<div>•<span> </span>Conexion:1/2 npt</div>

<div>•<span> </span>Rango: 0 a 1 Bar</div>

<div>•<span> </span>Doble escala Bar/PSI</div>

Modelo:    INT-100H + HM + HS<br />
•    FLOWSONIC - Handheld / Hand Hold Ultrasonic Flowmeter<br />
•    Brand (INTRIAL), Made in Taiwan for INTRIAL<br />
•    Measuring Accuracy Flowmeter/Calorimeter: Better than 1% ; Water meter: Better than 2%; Heat Meter: EN1434 Standard<br />
•    Repeatability Better than 0.2% or 0.5%<br />
•    Flow Type Water, sea water, industrial water, oil liquid, sewage and single liquid available for ultrasonic<br />
•    Velocity ±0.03~±105ft/s(±0.01~±32m/s),bi-ditectional<br />
•    Pipe Material Steel, stainless steel, cast iron, copper, PVC, aluminum, glass reinforced plastics or other compact pipe and lined pipe allowed<br />
•    Liquid Temp 32 F~320 F (0 C~160 C)<br />
•    Output Interface OCT, RS232<br />
•    Battery and Power 3AAA Ni-H built-in batteries, when fully recharged, it will last over 12 hours of operation.<br />
•    90V-230VAC for the charger<br />
•    Flow Type Water, sea water, industrial water, oil liquid, sewage and single liquid available for ultrasonic<br />
TRANSDUCTORES QUE INCLUYE:<br />
HM<br />
•    Medium size trasducer(magnetic with mounting rack)<br />
•    Dim 11”*1.6”*1.6”(180*40*40mm3) for each<br />
•    For pipe size 2”~28”(DN50~DN700mm)<br />
HS<br />
•    Handheld small size trasducer(magnetic with mounting rack and handle)<br />
•    Dim 7.9”*1”*1”(200*2.5*2.5mm3), handle length 3.9”(100mm)<br />
•    For pipe size1/2”~4”(DN15mm~100mm)

-RANGO :0 to 60 bar/0 to 870 psi,<br />
-Manómetro tipo Bourdon  ,<br />
-Marca AFRISO(Alemania)  ,<br />
-Diámet,ro de Carcasa 2 1/2''(63mm),<br />
-Precisión 1.6(EN 83,7-1/6),<br />
-Temperatura operación Max 80°C,<br />
-Conexión POSTERIOR,1/4 ''NPT  ,<br />
-Material:caja en acero inoxidable 1.4571 y conexión en bronce.<br />
,con/sin glicerina(Especificar al ordenar,no afecta, el precio),

RF63,D951(86051931(0 to 400 bar)<br />
Codigo: 0000003150  <br />
Numero de parte: 0166 01001  <br />
Manómetro de presion, 400 bar   <br />
Marca AFRISO (ALEMANIA)   <br />
Diámetro Carcaza: 63 mm   <br />
Conexión: G ¼ B central trasera(bronce)   <br />
Material Carcaza: Acero Inoxidable 1.4301 with crimped bezel   <br />
Partes húmedas: Latón   <br />
Vidrio: Safety Glass   <br />
Precisión: Class 1.6   <br />
ADICIONALES.- Incluye damper (restrictor), logotipo de RESEMIN(Fondo negro y letras blancas) y aro para instalación con 3 pernos en tablero

MANÓMETRO TIPO BOURDON CON GLICERINA <br />
Marca: AFRISO(Alemania)  <br />
Rango: 0 a 16 bar (0 a 232 PSI)<br />
Diámetro de Carcasa: 2 1/2''(63 mm)  <br />
Precisión: 1.6  <br />
Temperatura operación medio: Max 150°C  <br />
Material caja /conexión:acero inoxidable 304/Acero Inoxidable 316

LIQUID LEVEL SWITCH<br />
Marca: MURPHY<br />
Process connection: 2” NPT<br />
Pressure Rating: 2000 psig (13.8 MPa)[138 bar]<br />
Body: Stainless Steel<br />
Float: 304SSover: ASTM A351 CF8 (304 SS)<br />
Listed for class I, Div.I Locations<br />
Switch rating: 5A @ 125-250-480 VAC<br />
Process Temperature: -20 to 300°F (-29 to 149°C)

Model: KPH-8221<br />
KPH - Compact Pressure Switch<br />
(70…1015 PSIG, Aluminum, SS, NBR, PTFE)<br />
KOBOLD USA

HYDROSTATIC HEAD LEVEL SWITCH<br />
•    Marca: MURPHY<br />
•    Process connection: 1” NPT<br />
•    Max Pressure Rating: 25 psi (172 kPa)[1.72 bar]<br />
•    Case: Aluminum (Standard)<br />
•    O-ring: Viton<br />
•    Snap-switch ratings: SPDT 5A @ 125, 250 o 480VAC

FF100-1.5-BR<br />
• Regulators for Non -Refillable cylinders<br />
• On/Off Knob with cylinder pressure gauge<br />
• Attachable cylinders: 34DA, 60DA, 103DS, 112DA<br />
• Valve: C10<br />
• Flow rate: 1.5 l/min<br />
• Material. BRASS