SERVIDOR DE TIEMPO M300, RJ45 connector
Modelo: LANTIME M300/MRS/LNE/TC-1-1 w/o (GPSANT+SPRO+10)<br />
Description: NTP time server with ultra-stable integrated oscillator OCXO-HQ *) <br />
and Intelligent Reference Selection Algorithm (IRSA)<br />
Marca: MEINBERG<br />
Intelligent switching between available synchronization sources <br />
(MRS): GPS, Time Code (e.g. IRIG-B), Pulse Per Second (PPS)<br />
10MHz or external NTP servers.<br />
4 x LAN interface 10/100 MBit, RJ45 connector<br />
1 x Terminal RS232 interface, 9pin D-Sub male connector <br />
for initial setup and configuration<br />
1 x USB Service interface<br />
1 x LC-Display (2 x 40 characters) and 8 push buttons<br />
4 x status LEDs<br />
<br />
Reference Inputs:<br />
1 x Meinberg GPS antenna input, BNC connector, isolated<br />
1 x PPS input, TTL, pulse duration >= 5µs, active high, female BNC connector<br />
1 x 10 MHz input, sine (1.5Vpp - 5Vpp) or TTL, female BNC connector<br />
1 x Time Code modulated input, BNC connector, isolated by transformer<br />
Insulation voltage 3000 VDC<br />
Input impedance: 50 Ohm, 600 Ohm, 5 kOhm <br />
Internally selectable by jumper (default 600 Ohm)<br />
Input signal : 600mV to 8V (Mark, peak-to-peak)<br />
1 x Time Code unmodulated input, BNC connector, isolated by opto-coupler<br />
Insulation voltage : 3750 Vrms<br />
Internal series resistor : 330 Ohm,<br />
Max. input current : 25mA<br />
Diode forward voltage : 1.0V...1.3V<br />
selectable Time Code Inputs, modulated / unmodulated (DCLS):<br />
B122/123 / B002/003<br />
B126/127 / B006/007<br />
IEEE1344 (modulated and DCLS)<br />
AFNOR NFS 87-500 (modulated and DCLS)<br />
<br />
Signal Outputs:<br />
2 x RS232 interface, independent, 9pin D-Sub female connector<br />
with multi data formats timestrings.<br />
1 x PPS, TTL into 50 ohm, pulse duration 200 msec, active high<br />
female BNC connector<br />
1 x Standard Frequency 10 MHz, TTL into 50 ohm<br />
female BNC connector<br />
1 x Alarm Relay Output, change-over contact, 3pin DFK connector<br />
1 x IRIG-B amplitude modulated sinewave output (TC mod)<br />
3 Vpp into 50 ohm, female BNC connector <br />
1 x IRIG-B pulse-width modulated DC output (TC DCLS)<br />
TTL into 50 ohm, active high, female BNC connector<br />
(mod.and unmod. Time Code signals are generated in parallel ) <br />
additional Time Codes available: IEEE1344, C37.118 <br />
and AFNOR NFS 87-500<br />
<br />
Technical specifications:<br />
Power supply: 100-240 V AC (50-60 Hz), with EU power cable<br />
Power consumption: max. 30 W<br />
19" metal chassis, 1 U/84 HP (483 mm wide x 43 mm high x 285 mm deep)<br />
Includes:<br />
1 x Manuals in English on USB stick<br />
Without GPS Antenna, surge suppressor and coaxial cables. <br />
Brand: MEINBERG |
Línea: MEINBERG |